🔧 Product Overview – Woodhead Molex 5136-RE-VME PROFIBUS Interface Card SST
The Woodhead Molex 5136-RE-VME is a high-performance PROFIBUS interface card designed for industrial automation and control systems. This module enables seamless communication between VMEbus-based control systems and PROFIBUS networks, allowing reliable data transfer, process monitoring, and system synchronization in complex industrial environments. Built for robustness and long-term operation, it is suitable for manufacturing, process control, and automation applications where deterministic communication and system integrity are critical.
📊 Technical Specifications (Datasheet Summary)
| Parameter | Description |
|---|---|
| Manufacturer | Woodhead Molex |
| Model Number | 5136-RE-VME |
| Product Type | PROFIBUS Interface Card (SST) |
| Function | Data communication between VMEbus systems and PROFIBUS networks |
| Bus Interface | VMEbus compliant |
| Network Protocol | PROFIBUS DP / SST (Slave Standard Timing) |
| Transmission Speed | 9.6 kbit/s to 12 Mbit/s |
| Connector Type | 9-pin D-sub PROFIBUS connector |
| Operating Temperature Range | -20°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Supply Voltage | +5 VDC typical via VMEbus backplane |
| Power Consumption | < 5 W typical |
| Mounting Type | VME card slot (6U form factor) |
| Dimensions | 233.35 mm x 160 mm (6U VME standard) |
| Weight | ~0.6 kg |
| Isolation | Optical isolation on PROFIBUS interface for surge protection |
| Compliance | CE, RoHS |
| Applications | Industrial automation, factory control, process monitoring, robotics |
| Part Status | Active / Repairable |
⚙️ Functional Description
The 5136-RE-VME card acts as a bridge between VMEbus-based controllers and PROFIBUS networks. It supports high-speed cyclic and acyclic data exchange, enabling real-time communication for automation systems. With built-in diagnostic functions, the module allows continuous monitoring of network status, error detection, and system fault notification, enhancing overall reliability.
The card integrates surge protection and optical isolation to protect both the control system and the PROFIBUS network from voltage transients and electrical noise. Its VMEbus interface ensures deterministic communication timing and compatibility with a wide range of VME-based industrial controllers.
🧩 Key Features
- ⚡ High-Speed PROFIBUS Communication – Supports data rates up to 12 Mbit/s for real-time applications.
- 🛠 VMEbus Compliant – Easy integration into existing VMEbus systems.
- 🌡 Wide Temperature Operation – Reliable performance from -20°C to +70°C.
- 🔋 Optical Isolation – Protects against voltage spikes and reduces EMI impact.
- 🧰 Maintenance-Friendly Design – Plug-in card design allows quick replacement and minimal downtime.
- 💡 Diagnostics & Monitoring – Built-in LEDs and software diagnostics for network status monitoring.
🧰 Installation and Maintenance
Installation Guidelines:
- System Power Down: Ensure all power to the VME system is disconnected.
- ESD Protection: Wear an anti-static wrist strap during installation to prevent electrostatic damage.
- Card Insertion: Align the card with the VME slot and insert carefully without applying excessive force.
- Connector Wiring: Attach PROFIBUS cabling securely, ensuring proper orientation of D-sub connector.
- System Power-Up: Restore power and verify network connectivity and diagnostic LEDs.
- Software Configuration: Configure the PROFIBUS address, baud rate, and cyclic/acyclic parameters through system software.
Maintenance Tips:
- Inspect connectors and cables periodically for corrosion or looseness.
- Clean dust from the module and VME rack to prevent overheating.
- Verify optical isolation and surge protection components for signs of wear.
- Replace immediately if LED diagnostics indicate network or card faults.
- Keep firmware and drivers updated according to manufacturer guidelines.
⚠️ Usage Precautions
- Do not hot-swap the card while the system is powered.
- Avoid bending or stressing the PCB during installation.
- Ensure proper grounding of the VME rack to prevent electrical faults.
- Prevent exposure to excessive humidity, dust, or corrosive substances.
- Verify PROFIBUS network termination and configuration before powering the system.
🌍 Applications
The Woodhead Molex 5136-RE-VME card is ideal for:
- Factory automation and process control
- Robotic system integration
- VME-based industrial computing platforms
- Distributed control systems (DCS)
- Monitoring and supervisory control in manufacturing plants
🌐 For More Information
Product details and availability can be found at https://www.fy-module.com/ and https://www.fy-module.com/product/.
🔗 Recommended Similar Products
| Model | Description | Hyperlink |
|---|---|---|
| Woodhead Molex 5136-RE-VME-B | PROFIBUS interface card with enhanced diagnostics | View Product |
| Woodhead Molex 5136-RE-VME-C | Dual PROFIBUS interface card | View Product |
| Siemens 6GK1562-3AA00 | PROFIBUS DP VME interface card | View Product |
| Phoenix Contact IBS PB VME | VME PROFIBUS slave interface card | View Product |
| ABB CI513-RE-VME | VMEbus PROFIBUS interface with SST support | View Product |
| Molex 5136-RE-PRO | Standard PROFIBUS VME card for industrial automation | View Product |
📦 Summary:
The Woodhead Molex 5136-RE-VME PROFIBUS Interface Card SST delivers high-speed, reliable communication between VME-based systems and PROFIBUS networks. Its robust design, wide operating temperature range, and advanced diagnostics make it ideal for mission-critical industrial applications. Proper installation, regular maintenance, and adherence to usage precautions ensure long-term system performance and minimal downtime.
