📘 Product Overview — Bently Nevada 2300/25-00 (23002500) Vibration Monitor
The Bently Nevada 2300/25-00 Vibration Monitor is a compact and intelligent condition monitoring solution designed for continuous machinery protection and performance analysis. This module provides real-time vibration measurement, trend recording, and alarm indication for rotating equipment such as turbines, compressors, pumps, and motors. Built with industrial-grade precision and reliability, the 2300/25-00 ensures early fault detection and supports predictive maintenance strategies in demanding environments like oil & gas, petrochemical, and power generation industries.
⚙️ Technical Specifications (Datasheet Summary)
| Parameter | Description |
|---|---|
| Model Number | 2300/25-00 (23002500) |
| Manufacturer | Bently Nevada (GE) |
| Product Type | Dual-channel Vibration Monitor |
| Measurement Type | Vibration (velocity, acceleration, or displacement) |
| Number of Channels | 2 dynamic inputs + 1 tachometer input |
| Input Range | ±20 V peak for vibration signals |
| Sensor Compatibility | Compatible with Bently Nevada proximity probes, velocity sensors, and accelerometers |
| Frequency Response | 0.5 Hz – 10 kHz (sensor dependent) |
| Resolution | 16-bit A/D converter |
| Output Type | 4–20 mA current output and relay contact outputs |
| Alarm Levels | 2 configurable levels (Alert / Danger) |
| Relay Outputs | 2 independent relays for machine shutdown or warning |
| Communication Interface | Modbus TCP / Ethernet |
| Power Supply | 24 VDC nominal |
| Power Consumption | 8 W typical |
| Operating Temperature | -25°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Mounting Type | Panel or DIN-rail mount |
| Dimensions (W × H × D) | 130 × 35 × 120 mm |
| Weight | Approx. 0.6 kg |
| Compliance | CE, UL, and CSA approved |
| Enclosure Rating | IP20 (for panel-mounted installations) |
🧩 Product Features
- Continuous Machinery Protection: Monitors vibration amplitude and frequency spectrum in real time to detect imbalance, misalignment, or bearing wear.
- Dual Channel Design: Supports two simultaneous vibration channels for redundant or cross-machine measurement.
- Configurable Alarms: Programmable warning and danger thresholds trigger relay outputs for safety actions.
- Flexible Integration: Modbus TCP communication enables seamless integration with DCS, PLC, or SCADA systems.
- Rugged Construction: Designed to withstand harsh industrial environments and high temperatures.
- High Accuracy: 16-bit resolution ensures precise data capture and minimal signal noise.
🔧 Installation Instructions
- Preparation:
- Verify that the mounting location is vibration-free and accessible.
- Confirm all sensors are properly calibrated and matched with the monitor’s input configuration.
- Mounting:
- Mount the unit on a flat DIN-rail or panel surface using the supplied brackets.
- Ensure adequate clearance for cable routing and ventilation.
- Wiring:
- Connect vibration sensors to dynamic input channels following polarity markings.
- Wire the 24 VDC power supply to the terminal block, ensuring proper grounding.
- Connect relay outputs to the machine’s shutdown or alarm circuits.
- Configuration:
- Use the configuration software to set measurement units, alarm thresholds, and Modbus parameters.
- Perform functional testing to verify correct operation and communication.
🧰 Maintenance and Care
- Periodic Inspection: Regularly check connections, sensors, and wiring for damage or looseness.
- Calibration: Verify sensor and monitor calibration annually to maintain accuracy.
- Firmware Updates: Apply updates only through approved GE/Bently Nevada software tools.
- Cleaning: Keep the monitor enclosure clean and dry; use anti-static brushes or compressed air.
- Replacement: Replace damaged modules with the same model to ensure system integrity.
- Storage: Store unused units in anti-static packaging in a dust-free, humidity-controlled environment.
⚠️ Usage Notes and Safety Precautions
- Ensure proper grounding to prevent signal interference or electrical hazards.
- Avoid exceeding rated voltage or temperature limits.
- Use only approved sensors and cables to maintain system compatibility.
- Installation and maintenance should be performed by qualified technicians.
- Always follow lockout and tagout (LOTO) procedures when connecting to machine circuits.
🔗 Purchase and Support
For technical assistance or product purchase, visit:
🌐 https://www.fy-module.com/
🌐 https://www.fy-module.com/product/
🧠 Recommended Compatible / Similar Products
| Model | Description | Link |
|---|---|---|
| Bently Nevada 2300/20-00 | Dual-Channel Machinery Vibration Monitor | View Product |
| Bently Nevada 3500/22M | Transient Data Interface Module | View Product |
| Bently Nevada 3500/40M | Proximity Monitor Module | View Product |
| Bently Nevada 3500/42M | Velocity/Acceleration Monitor | View Product |
| Bently Nevada 1900/65A | Compact Vibration Monitor for Motors and Pumps | View Product |
| Bently Nevada 3701/40 | Intelligent Machine Protection System | View Product |
🧾 Summary
The Bently Nevada 2300/25-00 (23002500) Vibration Monitor is a smart, rugged, and precise condition monitoring solution tailored for critical rotating machinery. Featuring dual-channel vibration inputs, programmable alarms, and real-time Modbus communication, it ensures comprehensive protection and early fault detection. Proper installation, calibration, and maintenance enable long-term reliability and continuous machinery performance across a wide range of industrial applications.
