Product Description
The ABB ASEA DSPA110 is a legacy industrial control circuit board associated with the ASEA robotics and automation equipment family. It is identified by the model designation DSPA 110 and is available under several hardware and assembly numbers, including YB161101-CK, YB161101-AK/2, and YB161102-AK/2.
The DSPA110 is commonly listed as a computer or robot control board for legacy ASEA systems. It is intended for use in compatible existing installations where the original board needs maintenance, repair, or replacement.
Because multiple assembly numbers and revisions are associated with the DSPA110 designation, buyers should verify the complete identification code printed on the board before ordering. Different suffixes should not automatically be treated as interchangeable.
Product Parameters
- Brand: ABB / ASEA
- Model: DSPA110
- Product Name: Robot Control / Computer Circuit Board
- Product Type: Industrial Control PCB
- Series: ASEA Legacy Robotics and Automation
- Known Assembly Numbers: YB161101-CK, YB161101-AK/2, YB161102-AK/2
- Hardware Revision: Verify the physical board label
- System Compatibility: Compatible ASEA equipment; exact system to be confirmed
- Interface: To be confirmed from board markings and system documentation
- Place of Manufacture: Sweden (reported for this product family)
- Product Status: Legacy spare part
- Dimensions: Not specified
- Weight: Approximately 0.3 kg reported for one listed assembly; verify actual unit
- Power Requirements: Refer to the original equipment documentation
- Discontinued: Listed as discontinued by a supplier; confirm current ABB lifecycle status
Main Applications
- Legacy ASEA robotic control equipment
- Industrial robot maintenance and repair
- Replacement of compatible computer control boards
- Restoration of existing ASEA automation installations
- Industrial spare-parts inventory
- Maintenance of older automated production equipment
Installation and Commissioning
- Confirm the DSPA110 model and complete YB assembly number on the original board.
- Compare the replacement board’s revision, connectors, and component layout with the installed unit.
- Record existing wiring, board position, and configuration settings before removal.
- Isolate the equipment according to the original system maintenance procedure.
- Use ESD protection when handling the circuit board.
- Inspect the mounting position and connectors for contamination or damage.
- Install the replacement board in the specified position.
- Restore power and check system diagnostics and controller status.
- Perform the applicable robot control and functional checks before returning the equipment to operation.
Daily Maintenance and Care
- Inspect the board for dust, corrosion, and physical damage.
- Check connectors and cable interfaces during scheduled maintenance.
- Keep the control cabinet clean and properly ventilated.
- Monitor system alarms and abnormal robot control behavior.
- Avoid vibration, moisture, and excessive temperature.
- Store spare boards in antistatic packaging.
- Record board identification numbers and replacement history.
Troubleshooting and Common Problems
- Board not recognized: Check the board identification, connector seating, and system compatibility.
- Intermittent operation: Inspect connectors, power stability, and possible environmental interference.
- Unexpected control behavior: Verify board revision and system configuration.
- Controller alarm: Review the host equipment’s diagnostic information.
- Replacement board mismatch: Compare the full YB assembly number rather than relying only on DSPA110.
Safety Precautions
- Installation should be performed by qualified industrial automation or robotics technicians.
- Follow the machine manufacturer’s shutdown and isolation procedures.
- Secure the robot and surrounding machinery before maintenance.
- Do not insert or remove the board while energized unless the equipment documentation explicitly permits it.
- Use appropriate ESD protection.
- Complete system checks and approved safety tests before restarting the robot.
Recommended ABB / ASEA Models and Related Products
The following are related legacy ASEA robotics and automation boards. They are useful for spare-parts searches but are not confirmed direct replacements for DSPA110.
- ASEA DSQC 103 – Robot control circuit board.
- ASEA DSQC 104 – Robot control board.
- ASEA DSQC 104B – Robot control circuit board.
- ASEA DSQC 110 – Robot control board.
- ASEA DSQC 115 – Robot control board.
- ASEA DSQC 123B – Robot control circuit board.
- ASEA DSQC 208A – Robot control board.
- ASEA DSQC 218 – Robot control board.
- ASEA DSDX 110 – Industrial automation circuit board.
- ASEA DSPC 155 – Computer control board.
- ABB DSPC 154 – Industrial processor board.
- ABB DSPB 112 – Industrial control board.
- ABB DSMB 151 – Memory board.
- ABB DSMB 133 – Memory board.
- ABB DSDC 110B – Industrial control circuit board.
Frequently Asked Questions
Q1: What is the ABB ASEA DSPA110?
A1: It is a legacy ASEA industrial computer and robot control circuit board used in compatible automation equipment.
Q2: Is DSPA110 a robot control board?
A2: It is commonly identified by industrial suppliers as a robot control or computer board. Confirm its exact function against the original equipment documentation.
Q3: What assembly numbers are associated with DSPA110?
A3: Listings include YB161101-CK, YB161101-AK/2, and YB161102-AK/2. The complete assembly number is important when sourcing a replacement.
Q4: Are all DSPA110 boards interchangeable?
A4: No interchangeability should be assumed. Check the full assembly number, revision, connector layout, and host-system compatibility.
Q5: What should be checked before ordering?
A5: Confirm the DSPA110 designation, complete YB number, revision, physical condition, and compatibility with the installed ASEA equipment.

