The ABB CI541V1 (Part Number 3BSE014666R1) is a high-speed communication submodule designed for integration into ABB’s Advant Controller and S800 I/O systems. Specifically, it functions as a PROFIBUS DP interface, allowing the host controller to communicate with a wide range of decentralized field devices, including drives, motor starters, and remote I/O clusters. This submodule is typically mounted onto a carrier or a communication interface base, providing the physical and logical gateway for real-time data exchange across industrial networks.
Product Specifications
For more information and availability, please visit the product page: CI541V1
-
Manufacturer: ABB
-
Model Number: CI541V1
-
Part Number: 3BSE014666R1
-
Protocol: PROFIBUS DP (Decentralized Periphery)
-
Baud Rate: Support for up to 12 Mbit/s
-
Communication Role: Slave or Master (depending on the host configuration)
-
Power Consumption: 50 mA (Internal from carrier board)
-
Connector: 9-pin D-sub (via the carrier unit)
-
Dimensions: 60 mm x 50 mm x 15 mm (Compact submodule design)
-
Weight: 0.08 kg (0.18 lbs)
-
Country of Origin: Sweden / Germany
Application Fields
-
Distributed Control Systems (DCS): Adding PROFIBUS connectivity to Advant and 800xA systems.
-
Factory Automation: Coordination of variable frequency drives (VFDs) and smart sensors.
-
Process Manufacturing: Interfacing with pneumatic manifolds and flow meters in chemical plants.
-
Material Handling: Centralized control of distributed conveyor drives and sorting systems.
-
Machine Control: Integration into high-speed packaging and bottling machinery.
Product Instructions
The CI541V1 is a submodule and must be inserted into a compatible carrier module (such as a CI541 or similar communication hub). Before installation, ensure the power to the main controller and carrier is completely disconnected. Carefully align the pins of the CI541V1 with the socket on the carrier board and press firmly to ensure a solid connection. Avoid touching the gold contacts to prevent contamination. Once the submodule is seated, the PROFIBUS address is typically set via the host controller’s software configuration or rotary switches on the carrier module. Use high-quality shielded PROFIBUS cable and ensure the DB9 connector is tightened to provide a stable electrical connection. The status of the module is usually monitored via the diagnostic LEDs on the carrier unit’s front panel.
Q&A: Common Questions
Is the CI541V1 a standalone module? No, it is a submodule. It requires a parent carrier board or interface module to provide power, physical housing, and the external 9-pin D-sub port.
Can this module handle PROFIBUS DP-V1 acyclic data? Yes, the CI541V1 supports advanced PROFIBUS functions, including acyclic data transmission for device parameterization and extended diagnostics, provided the host controller supports these features.
What should I check if there is a ‘Bus Fault’? First, verify the network termination resistors are “ON” at the first and last physical devices in the line. Check for a cable break or a short circuit in the DB9 connectors. Finally, ensure the station address in the software matches the physical configuration of the devices on the bus.
Does this module require a separate power supply? No, it draws the small amount of power it requires directly from the carrier board it is plugged into.
Related Model Recommendations
-
ABB CI541 3BSE014660R1
-
ABB CI540 3BSE000965R1
-
ABB CI854B 3BSE020772R1502
-
ABB CI522A 3BSE018299R1
-
ABB CI520 3BSE000632R1
