Product Description
The ABB DSDI 115 (57160001-NV) is a 32-channel digital input module designed for ABB S100 I/O systems used in industrial process control and automation applications. It accepts 24 V DC digital signals and uses optical isolation to separate field input circuits from the internal control electronics.
The module collects discrete signals from field devices such as limit switches, push buttons, auxiliary contacts, and status sensors. It transfers input states to the control system for equipment monitoring, sequence control, interlocking, and process supervision.
The DSDI 115 is suitable for maintenance, replacement, and spare-parts requirements in compatible ABB Advant and related S100 I/O installations.

Main Features
- 32 digital input channels
- 24 V DC rated input voltage
- Optically isolated input circuits
- Four-group input configuration supported by the DSTD 190 connection arrangement
- 5 ms symmetrical input filtering
- 4 kΩ input impedance
- Designed for ABB S100 I/O systems
- Suitable for industrial status monitoring and control applications
Product Parameters
- Brand: ABB
- Model: DSDI 115
- Product ID: 57160001-NV
- Product Name: Digital Input Module
- Product Series: S100 I/O
- Input Type: Digital Input
- Number of Channels: 32
- Rated Input Voltage: 24 V DC
- Input Signal Isolation: Optical Isolation
- Logic 1 Input Range: 15–35 V DC
- Logic 0 Input Range: -25 to +5 V DC
- Input Impedance: 4 kΩ
- Symmetrical Filter Time: 5 ms
- Event Detection: Not supported
- Typical +5 V Current Consumption: 160 mA
- Typical Power Dissipation: 4 W
- Compatible Connection Arrangements: DSTD 150A or DSTD 190, subject to system configuration
- Required Connection Cable: DSTK 150 for the documented DSTD 150A / DSTD 190 arrangements
- Place of Manufacture: Not confirmed
- Country of Origin: Verify from product label
- Dimensions: 238.5 × 27 × 328.5 mm (catalog-listed dimensions; verify physical measurements)
- Net Weight: Approximately 0.345 kg
- Product Status: Verify current availability
- Discontinued Status: Confirm with ABB or an authorized supplier
Installation and Commissioning
- Confirm that the existing control system uses the ABB S100 I/O architecture and supports the DSDI 115.
- Check the module label and verify the complete part number, 57160001-NV.
- Confirm the connection unit and cable arrangement before installation. DSTD 150A and DSTD 190 configurations use the documented DSTK 150 cable arrangement.
- Isolate field power and follow the site’s electrical safety procedures before removing or installing the module.
- Inspect the module connector, backplane interface, and connection unit for damage, contamination, or loose connections.
- Install the module in the designated position and secure the associated wiring.
- Restore power and check the system diagnostics for module recognition and communication status.
- Test representative field input points and verify that their displayed states match the actual field signals.
Daily Maintenance and Care
- Check module status and system diagnostics during routine inspections.
- Inspect field wiring and terminal connections for looseness, corrosion, or overheating.
- Keep the module and cabinet free from dust, moisture, and conductive contamination.
- Monitor input signals for unstable switching or unexpected state changes.
- Review controller alarms associated with the I/O station.
- Keep a record of module replacements, wiring changes, and commissioning tests.
- Store spare modules in suitable protective packaging and follow applicable electrostatic discharge precautions.
Troubleshooting and Common Questions
Q1: What is the primary function of the DSDI 115?
A: It receives 32 discrete 24 V DC field signals and transfers their states to an ABB S100 I/O control system.
Q2: Is the DSDI 115 an analog input module?
A: No. It is a digital input module designed for discrete ON/OFF signals.
Q3: Is the DSDI 115 optically isolated?
A: Yes. Its input circuits use optical isolation.
Q4: Can it replace the DSDI 116?
A: They are not automatically interchangeable. The DSDI 116 is a non-isolated 32-channel, 24 V digital input board. Check the original system design and wiring requirements before selecting a replacement.
Q5: What should be checked if an input signal is not detected?
A: Check the field supply voltage, signal polarity, terminal wiring, connection unit, cable, and input status in the control system. Also verify that the applied voltage meets the specified logic thresholds.
Q6: Does the module support event detection?
A: The documented DSDI 115 specifications indicate that event detection is not supported.
Q7: What should be checked before ordering a replacement?
A: Verify the full part number, system configuration, connection unit, cable arrangement, and required input voltage.
Safety Precautions
- Disconnect power before installation, removal, or wiring work.
- Follow the control system manufacturer’s installation instructions.
- Do not apply voltage outside the specified input range.
- Confirm the correct terminal assignment before connecting field signals.
- Use appropriate ESD protection when handling the module.
- Commission the replacement under approved site procedures.
Recommended ABB Related Models
The following are related ABB S100 I/O models. They are not all direct substitutes for the DSDI 115.
- DSDI 110 – 14-channel, 24 V digital input board.
- DSDI 110A – 24 V digital input board in the S100 I/O family.
- DSDI 116 – 32-channel, 24 V non-isolated digital input board.
- DSDI 120 – 32-channel, 48 V digital input board.
- DSDI 120A – 48 V digital input board.
- DSDI 125 – 32-channel, 48 V digital input board.
- DSDI 126 – 32-channel, 48 V non-isolated digital input board.
- DSDI 131 – 16-channel, 110 V AC/DC digital input unit.
- DSDI 141 – 16-channel, 220 V AC/DC digital input unit.
- DSDO 110 – 32-channel digital output board.
- DSDO 115 – 32-channel digital output board.
- DSDO 115A – 32-channel digital output board with OSP control.
- DSAI 130 – 16-channel analog input board.
- DSAI 133 – 32-channel analog input board.
- DSAO 120 – 8-channel analog output board.

