ABB | DSTD 108P 3BSE018333R1 | 8-Channel Relay Connection Unit

Product Description

The ABB DSTD 108P 3BSE018333R1 is an 8-channel relay connection unit designed for the ABB Advant Master process control system and S100 I/O architecture. It is specifically used with the DSDO 115A digital output module to interface controller output signals with external AC and DC field circuits.

The unit receives 24 VDC control signals and provides eight relay-switched output channels for field-device control. Its supported switching voltage range is 24–250 VAC/DC, making it suitable for industrial applications involving auxiliary relays, indicator circuits, solenoid valves, and other compatible control loads.

The DSTD 108P provides an interface between the DSDO 115A output module and field wiring. It is intended for existing ABB Advant Controller installations requiring relay-based digital output switching, maintenance, or replacement.

ABB DSTD 108P 3BSE018333R1 CONNECTION UNIT RELAY  CARD Image 1 of 4

Product Parameters

  • Brand: ABB
  • Model: DSTD 108P
  • Product ID: 3BSE018333R1
  • Series: Advant Master / S100 I/O
  • Product Name: 8-Channel Relay Connection Unit
  • Product Type: Digital Output Relay Connection Unit
  • Relay Channels: 8
  • Compatible I/O Module: DSDO 115A
  • Control Input Voltage: 24 VDC
  • Relay Output Voltage: 24–250 VAC/DC
  • Maximum Load Current: 3 A per channel, subject to load and switching conditions
  • AC Switching Capacity: Up to 720 VA at cos φ greater than 0.4
  • DC Switching Capacity: Up to 44 W under specified load conditions
  • Dimensions: Approximately 234 × 99 × 36 mm (D × W × H)
  • Net Weight: Approximately 0.168 kg
  • Country of Origin: Sweden
  • Product Status: Used; verify actual condition and testing history
  • Power Requirements: 24 VDC control supply through the compatible I/O arrangement
  • Discontinued: Legacy product; confirm current lifecycle status with ABB

Main Features

  • Eight integrated relay output channels.
  • Designed specifically for the ABB DSDO 115A digital output module.
  • Supports 24 VDC control signals.
  • Switching voltage range of 24–250 VAC/DC.
  • Relay-based isolation between control signals and external field circuits.
  • Suitable for mixed AC and DC industrial switching applications within specified ratings.
  • Compact connection-unit design for ABB S100 I/O installations.
  • Supports maintenance and restoration of legacy Advant Master systems.

Installation and Commissioning

  1. Verify the module label and confirm the complete part number 3BSE018333R1.
  2. Confirm that the host system uses a compatible ABB Advant S100 I/O configuration.
  3. Check that the associated digital output module is DSDO 115A.
  4. Review the wiring diagram and identify all eight relay output channels.
  5. Isolate the controller and external field circuits before installation.
  6. Inspect connectors, relay terminals, and contact surfaces for corrosion or physical damage.
  7. Install the DSTD 108P in the designated connection-unit position.
  8. Connect the 24 VDC control wiring and field output circuits according to the approved terminal diagram.
  9. Verify that each connected load stays within the relay’s voltage, current, and switching-capacity limits.
  10. Test each channel individually and confirm correct operation through the controller diagnostics and field devices.

Daily Maintenance and Care

  • Inspect relay terminals and connectors for loose wiring or oxidation.
  • Check for overheating, discoloration, or damaged insulation.
  • Monitor output behavior for intermittent switching or abnormal relay operation.
  • Verify the 24 VDC control supply during scheduled maintenance.
  • Inspect external loads for excessive current or inductive switching problems.
  • Check protective devices and suppression components where required.
  • Keep the control cabinet clean and maintain suitable ventilation.
  • Record wiring changes and relay-channel test results.

Troubleshooting and Common Questions

Q1: What is the main function of the ABB DSTD 108P?

A: It is an eight-channel relay connection unit that interfaces the DSDO 115A digital output module with external AC/DC field circuits.

Q2: How many relay channels does it provide?

A: The DSTD 108P provides eight relay channels.

Q3: What is the supported output voltage?

A: The documented switching voltage range is 24–250 VAC/DC.

Q4: Which ABB module is compatible with the DSTD 108P?

A: ABB specifies the DSDO 115A digital output module for this connection unit.

Q5: What is the maximum relay load current?

A: The Advant Controller documentation specifies a maximum load current of 3 A under the stated relay operating conditions. The actual permissible load also depends on switching voltage, load type, and switching frequency.

Q6: Can it directly replace DSTD 108 or DSTD 108L?

A: These products belong to the same relay connection-unit family, but their relay specifications and ordering designations must be compared before substitution. Confirm the complete part number and required switching capacity.

Q7: What should be checked if a relay output does not switch?

A: Check the 24 VDC control signal, field supply, terminal wiring, controller output command, relay condition, and connected load. Use the approved system wiring diagram for channel-level troubleshooting.

Recommended Related ABB Models

The following are related ABB Advant Master S100 I/O modules and connection components. They are not all direct replacements for the DSTD 108P.

  • DSDO 115A – 32-channel digital output module for compatible relay and connection-unit arrangements.
  • DSDO 115 – Advant S100 digital output module.
  • DSTD 108 – Eight-channel relay connection unit.
  • DSTD 108L – Eight-channel relay connection unit variant.
  • DSTD 108LP – Relay connection unit variant.
  • DSTD 109P – Static digital output connection unit.
  • DSTD 110A – Digital output connection unit with disconnectible screw terminal blocks.
  • DSTD 190 – Digital output connection unit.
  • DSTD 190V1 – Digital output connection unit variant.
  • DSTK 226L3 – Connection component used in DSDO 115/115A output sets.
  • DSTK 221L3 – S100 I/O output connection component.
  • DSTK 234L3 – S100 I/O connection component.
  • DSDO 120 – 16-channel digital output module.
  • DSTD 120A – Connection unit for DSDO 120.
  • SS110 – Voting unit for supported redundant 24 VDC configurations.

Safety and Compatibility Notes

The DSTD 108P is designed for a specific ABB S100 I/O configuration. Confirm compatibility with the DSDO 115A module and the target controller before installation.

Do not interpret the 250 VAC/DC maximum switching voltage as permission to exceed the relay’s load-current or switching-capacity limits. Inductive loads may require suitable suppression components. Installation and testing should be performed by qualified personnel using the approved electrical drawings and isolation procedures.

Share this story: