Product Description
The ABB DSTD-306 (57160001-SH) is an adapter relay connection unit designed for ABB Advant OCS control systems. It provides an interface between control-system output signals and external field circuits through an integrated relay arrangement.
The unit is identified in ABB-related component references as an 8-channel primary relay adapter. It is used in industrial automation installations where relay-based signal switching and electrical isolation are required between controller outputs and field equipment.

This assembly is suitable for maintenance and replacement of compatible ABB control-system hardware. Verify the complete part number, suffix, revision, relay arrangement, and wiring configuration before installation.
Product Parameters
- Brand: ABB
- Model: DSTD-306
- Product ID: 57160001-SH/2
- Base Part Number: 57160001-SH
- Product Name: Adapter Relay Connection Unit
- Product Family: ABB Advant OCS
- Channel Configuration: 8-channel relay adapter
- Relay Arrangement: Integrated relay interface
- Supply Voltage: 24 V DC (verify actual unit)
- Relay Current Rating: 3 A (verify relay and load specifications)
- Product Type: Connection Unit / Relay Adapter
- Application: Digital output signal interfacing
- Dimensions: Not officially verified
- Weight: Approximately 0.45 kg; verify actual unit
- Country of Origin: Confirm from product label
- Product Status: New – confirm condition and packaging of supplied unit
- Discontinued Status: Reported as discontinued; confirm with ABB
Main Features
- 8-channel relay adapter arrangement.
- Designed for ABB Advant OCS control-system installations.
- Provides relay-based switching between control outputs and field circuits.
- Supports interface applications involving external industrial loads.
- Helps separate control-side signals from field-side switching circuits.
- Suitable for replacement and maintenance of compatible legacy systems.
Typical Applications
- ABB Advant OCS automation systems
- Industrial digital output interfaces
- Relay-based control panels
- Motor starter and contactor control circuits
- Valve and actuator switching
- Industrial equipment interlocking
- Process automation and control cabinets
Installation and Commissioning
- Confirm the target ABB system configuration and the required DSTD-306 connection unit.
- Isolate the control supply and all external field power sources.
- Record the existing terminal assignments and relay wiring before removal.
- Verify the product ID, suffix, revision, and relay specifications against the original unit.
- Inspect the board, relays, connectors, and terminals for damage or corrosion.
- Mount the unit in the designated location and secure all connections.
- Check the 24 V DC supply requirements against the actual unit documentation.
- Verify field wiring, load current, polarity, and protective devices.
- Test each relay channel individually using the approved commissioning procedure.
- Confirm that the corresponding controller output and field device respond correctly before returning the system to service.
Daily Maintenance and Care
- Inspect relay contacts and terminals for discoloration or overheating.
- Check for loose wiring and damaged insulation.
- Monitor the 24 V DC supply for abnormal fluctuations.
- Check relay operation during scheduled maintenance.
- Keep the control cabinet clean and free from conductive dust.
- Inspect for moisture, corrosion, and excessive temperature.
- Record relay replacements and changes to field wiring.
Troubleshooting and Common Questions
Q: What is the function of the ABB DSTD-306?
A: It is an 8-channel relay adapter connection unit used to interface control-system signals with external field circuits.
Q: Is the DSTD-306 a standard digital output module?
A: No. It is a relay adapter connection unit rather than a standalone controller output module.
Q: What supply voltage does it use?
A: ABB-related component listings associate this unit with a 24 V DC relay arrangement. Confirm the exact supply requirements from the product label and wiring documentation.
Q: How many channels does the unit support?
A: Component references identify the DSTD-306 as an 8-channel primary relay adapter.
Q: What should be checked if a relay channel does not operate?
A: Check the control signal, 24 V DC supply, wiring, relay coil condition, contact condition, and connected field load. Use the circuit diagram to identify the correct channel terminals.
Q: Can the DSTD-306 be replaced by another DSTD connection unit?
A: Do not assume interchangeability. Different DSTD models have different interface functions, channel configurations, and wiring arrangements. Confirm the complete part number and system documentation before substitution.
Safety Precautions
- Installation and maintenance must be performed by qualified electrical personnel.
- Disconnect both control-side and field-side power before servicing.
- Verify that external loads cannot energize the circuit unexpectedly.
- Check relay contact ratings before connecting field loads.
- Use suitable overcurrent protection for the connected circuits.
- Follow ESD precautions when handling electronic assemblies.
- Never exceed the voltage and current ratings of the installed relays.
Recommended ABB Related Models and Components
The following are related ABB Advant OCS and S100 I/O components. They are not confirmed direct replacements for the DSTD-306.
- DSTD-301 – Adapter Connection Unit
- DSTD-302 – Connection Unit
- DSTD-306 – 8-Channel Relay Adapter
- DSTD-108 – Connection Unit
- DSTD-110A – Connection Unit
- DSTD-115 – Connection Unit
- DSTD-120 – Digital Output Connection Unit
- DSTD-131 – Digital Output Connection Unit
- DSTD-150A – Digital Input Connection Unit
- DSTD-180 – Relay Matrix Unit
- DSTD-185 – 48-Channel Connection Unit
- DSTD-189 – Connection Unit
- DSDO-110 – Digital Output Board
- DSDO-115 – Digital Output Board
- DSDI-115 – 32-Channel Digital Input Board

