ABB SAFT 187 CON Control Card 5761688‑1G

ABB SAFT 187 CON Control Card 5761688‑1G Technical Overview

The ABB SAFT 187 CON Control Card 5761688‑1G is a versatile I/O interface board designed for seamless integration into industrial control systems. It provides sixteen isolated digital inputs and eight isolated digital outputs, along with four analog inputs and two analog outputs. Digital inputs accept 24 V DC signals and draw under 5 mA each, while analog inputs handle 0–10 V or 4–20 mA ranges. Analog outputs drive 0–10 V or 0–20 mA loads. The board measures 150 mm × 100 mm × 25 mm, weighs 200 g, and mounts easily on a standard DIN rail or panel. Power is supplied via a 24 V DC rail with typical consumption below 5 W. Screw‑type terminal blocks rated for 5 A continuous load make wiring clear and reliable. Each channel features a green LED for active status and a yellow LED that flashes on fault detection. The card boots in under 500 ms and runs on stable, field‑updatable firmware.

The SAFT 187 CON uses a multilayer PCB and industrial‑grade components to ensure long‑term reliability. It operates over a temperature range from –25 °C to +70 °C and withstands vibration up to 5 g and shock up to 30 g. It meets IEC 61000‑4 immunity standards for electrostatic discharge (±4 kV) and surge (±2 kV). Conformal coating and an IP20 rating protect against dust and debris. Surge protection diodes on each input prevent damage from transient spikes. An onboard microcontroller continuously monitors for open circuits, shorts, and supply faults. When a fault occurs, the affected channel is disabled and its LED flashes. Test points allow quick voltage checks with a handheld meter. Simple jumpers let engineers select input types or enable test mode without special tools.

Industrial trends show growing demand for smart I/O modules with built‑in diagnostics and remote monitoring. A 2025 industry report highlights that predictive maintenance and digital twin strategies are driving annual market growth of over 10 percent for advanced control cards. Companies that adopt these modules see lower downtime and reduced maintenance costs. The SAFT 187 CON aligns with these needs by combining straightforward I/O functions with fault detection and easy firmware updates. Zhangzhou Fengyun Electric Equipment Co., Ltd. is a leading distributor of ABB and other major automation brands. The company offers a full range of controllers, I/O modules, sensors, drives, and power supplies. With robust import/export channels and a professional technical team, Fengyun Electric stocks fast‑moving parts and ships globally. Their sales engineer Amy is ready to assist at +86 153 5902 9662 or via email at geabbamy@gmail.com. For more information visit their official site, view the product catalog, or reach out through the contact page.

Below is a selection of similar stocked models from leading brands for varied control and I/O needs: