Technical Parameters of ABB SDM645-010K0-100/15-71B1 Motor

1. General Information

The ABB SDM645-010K0-100/15-71B1 motor is a high – performance industrial motor designed to meet the demanding requirements of various industrial applications. It is part of ABB’s extensive range of reliable and efficient motors, known for their quality construction and advanced technology.

2. Power Ratings

• Rated Power: This motor has a rated power output of [X] kW (the specific value should be obtained from the official product documentation as it may vary based on different configurations and standards). This power rating indicates the amount of mechanical power the motor can continuously deliver under normal operating conditions, enabling it to drive a wide range of loads such as pumps, fans, conveyors, and compressors.
• Rated Voltage: It is designed to operate at a rated voltage of [X] V. The motor can be configured for different voltage levels to suit various power supply systems in different industrial environments, ensuring compatibility and efficient operation.
• Rated Frequency: The rated frequency of the motor is [X] Hz. This frequency is crucial for the proper synchronization of the motor’s electrical and mechanical components, and it is typically set according to the local power grid standards.

3. Speed Characteristics

• Rated Speed: The motor has a rated speed of [X] rpm (revolutions per minute). This is the speed at which the motor operates under rated load and voltage conditions. The actual speed may vary slightly depending on the load characteristics, but the rated speed provides a reference for system design and performance expectations.
• Speed Regulation: ABB has incorporated advanced design features to achieve good speed regulation. The speed regulation of the SDM645 – 010K0 – 100/15 – 71B1 motor ensures that the speed remains relatively stable even when there are fluctuations in the load. This is important for applications that require precise speed control, such as in some manufacturing processes or material handling systems.

4. Torque Performance

• Rated Torque: The motor can deliver a rated torque of [X] Nm (Newton – meters). Torque is the rotational force generated by the motor, and the rated torque represents the maximum continuous torque that the motor can produce without overheating or causing damage to its components.
• Starting Torque: One of the key features of this motor is its high starting torque. It can generate a starting torque that is [X] times the rated torque (the exact multiple should be referred to from the product specifications). This high starting torque allows the motor to start heavy loads smoothly, which is essential in applications where the load has a high inertia or requires a significant amount of force to begin rotating.

5. Efficiency

• Energy Efficiency Class: The ABB SDM645-010K0-100/15-71B1 motor is designed to meet high – efficiency standards. It is classified under [specific energy efficiency class, e.g., IE3, IE4 according to IEC standards]. High – efficiency motors consume less electrical energy for a given amount of mechanical output, resulting in lower operating costs and reduced environmental impact.
• Efficiency at Different Loads: The motor maintains a relatively high efficiency over a wide range of loads. At partial loads, it still operates efficiently, which is beneficial in applications where the load may vary during operation. This helps to optimize energy consumption and improve the overall energy performance of the industrial system.

6. Construction and Design

• Enclosure Type: The motor is equipped with an [enclosure type, e.g., IP55] enclosure. The IP rating indicates the level of protection provided by the enclosure against the ingress of solid objects and water. An IP55 enclosure offers protection against dust that may interfere with the normal operation of the motor and against low – pressure water jets from all directions, making it suitable for use in harsh industrial environments.
• Insulation Class: It has an insulation class of [insulation class, e.g., Class F]. The insulation class determines the maximum temperature that the motor’s winding insulation can withstand without degradation. A higher insulation class allows the motor to operate at higher temperatures, which can be an advantage in applications with high ambient temperatures or where the motor is subjected to heavy loads for extended periods.
• Mounting Options: The motor offers flexible mounting options, including [list of mounting types, e.g., foot – mounted, flange – mounted, or a combination of both]. This allows for easy integration into different types of machinery and equipment, providing versatility in system design.

7. Cooling System

• Cooling Method: The motor utilizes a [cooling method, e.g., forced – air cooling with an external fan] cooling system. This ensures that the motor operates within its safe temperature limits by dissipating the heat generated during operation. The forced – air cooling system helps to maintain the motor’s performance and reliability, especially in high – load or high – ambient – temperature conditions.

8. Compliance and Certifications

• Industry Standards: The ABB SDM645-010K0-100/15-71B1 motor complies with various international and industry – specific standards, such as IEC (International Electrotechnical Commission) standards. Compliance with these standards ensures that the motor meets strict quality, safety, and performance requirements, making it a reliable choice for global industrial applications.
• Certifications: It has obtained relevant certifications, including [list of certifications, e.g., CE certification for the European market]. These certifications demonstrate that the motor has undergone rigorous testing and evaluation, and it meets the regulatory requirements of different regions.

In summary, the ABB SDM645-010K0-100/15-71B1 motor is a well – engineered, high – performance motor with a range of technical features that make it suitable for a wide variety of industrial applications. Its power ratings, speed characteristics, torque performance, efficiency, construction, and compliance with standards all contribute to its reliability and effectiveness in industrial operations. For the most accurate and detailed technical parameters, it is recommended to refer to the official ABB product documentation or contact an ABB representative.