The Consilium SW2020 Gas Detector is a high-reliability sensing solution engineered for the detection of flammable or toxic gases in demanding industrial and maritime environments. As a critical component of safety and fire detection systems, the SW2020 provides rapid response times and high accuracy, ensuring the protection of personnel, vessels, and offshore infrastructure.
Product Specifications
-
Manufacturer: Consilium
-
Model Name: SW2020
-
Product Type: Gas Detection Sensor
-
Dimensions: 130 mm x 130 mm x 90 mm
-
Weight: 1.5 kg
-
Origin: Sweden
Application Areas
The SW2020 is specifically designed for environments where hazardous gas accumulation poses a constant risk. Its primary applications include:
-
Marine engine rooms and cargo pump rooms.
-
Oil and gas offshore platforms and processing facilities.
-
Chemical storage areas and industrial processing plants.
-
LNG/LPG carrier vessel monitoring systems.
Product Usage Instructions
-
Safety Precautions: Installation must be conducted by certified personnel in accordance with hazardous area classification standards (e.g., ATEX or IECEx). Ensure the power is isolated during the mounting process.
-
Mounting: Install the detector in a location where gas is most likely to accumulate, considering the density of the specific gas being monitored (e.g., near the ceiling for lighter-than-air gases, near the floor for heavier-than-air). Secure firmly to prevent vibration-induced signal drift.
-
Wiring: Use certified cable glands and shielded cabling to connect the detector to the central fire and gas monitoring panel. Maintain strict adherence to the wiring diagram to ensure signal integrity.
-
Calibration: Upon initial installation, the unit must be calibrated using a certified test gas. Regular periodic calibration (typically semi-annually or as per local safety regulations) is mandatory to ensure sensor accuracy and compliance.
-
Maintenance: Keep the sensor head free of dust, oil, and moisture. Periodically inspect the sintered filter for blockages that may impede gas diffusion to the sensor element.
Q&A
What is the expected service life of the SW2020 sensor? The life span depends heavily on the environmental conditions and the concentration of gases it is exposed to. Typical sensor elements may last 2–5 years, but performance must be verified via routine calibration. Can the SW2020 be connected directly to a PLC? Yes, it typically provides standard industry outputs (such as 4-20mA or digital bus communication), allowing it to interface seamlessly with PLC-based control systems or dedicated fire and gas panels. How do I know if the sensor has reached the end of its life? If the device fails to reach the target concentration during calibration, or if the internal diagnostics report a “Sensor Low Sensitivity” error, it is time to replace the sensor element. Is this unit explosion-proof? Yes, the SW2020 is designed with explosion-proof housing to operate safely within designated hazardous zones. Always verify the specific certification labels on your unit before installation in an Ex-rated area.
Recommended Similar Models
-
Consilium Salwico Gas Detection Series
-
Dräger PIR 7000 Infrared Gas Detector
-
Honeywell Searchpoint Optima Plus
-
MSA Ultima X5000 Gas Monitor
-
Emerson Rosemount 925F Gas Detector
