CONVERTEAM | GDS1173-6016 | Power Interface Board

Converteam GDS1173-6016 (often associated with GE Power Conversion, Alstom, or Cegelec legacy systems) is a heavy-duty power interface and control circuit board engineered for industrial drive and power conversion systems. It acts as a critical intermediary module that handles signal routing, gate/amplifier interfacing, and power management across high-capacity industrial automation, marine propulsion, and heavy electrical infrastructure.

CONVERTEAM GDS1173-6016 POWER INTERFACE BOARD Image 1 of 4

📊 Technical Specifications

  • Brand: Converteam ( GE / Alstom / Cegelec legacy architecture)

  • Model / Part Number: GDS1173-6016

  • Series: Power Conversion Interface & Control Series

  • Product Name: Power Interface Board (featuring specialized amplifier configurations)

  • Place of Manufacture: United Kingdom / France / Europe

  • Condition Status: Factory New / Industrial Surplus / Refurbished

  • Design Features: Incorporates integrated X2 amplifiers and robust interface circuitry (non-firing layout variant)

  • Weight: Approx. 2.4 kg – 3.4 kg (5.3 lbs – 7.5 lbs)

  • Country of Origin: UK / EU

  • Power Rating / Supply: Standard low-voltage internal control rails and auxiliary bus power supplies derived from the main drive rack

⚙️ Operational Guidelines & Usage Methods

  • Install the circuit board carefully into its designated slot within a compatible Converteam drive cabinet or control rack, making sure to follow strict electrostatic discharge (ESD) safety protocols.

  • Terminate all internal control wiring, ribbon cables, and feedback connections tightly to the matching board connectors according to official Converteam electrical schematics.

  • Check jumper links, address configurations, and interface parameters prior to energizing the main power conversion assembly.

🔌 Power-On / Power-Off Sequence

  • Power-On Sequence: Verify that all backplane connectors, plug-in modules, and terminal block connections are secure. Apply the main control rack and auxiliary power supplies. Observe onboard status LEDs to ensure that internal diagnostics pass and the board initializes correctly before enabling high-voltage power sections.

  • Power-Off Sequence: Disable active drive pulses and safely isolate the main high-voltage DC bus or AC input feeds feeding the conversion system. De-energize and disconnect the primary control power supplies before extracting or servicing the interface card.

📖 Product Instructions

  • Periodically monitor board-level diagnostic indicators and communication status lights during routine system checks to ensure stable signal transmission.

  • Inspect edge connectors, terminal strips, and component surfaces during scheduled maintenance shutdowns to prevent dust accumulation or oxidation in demanding industrial environments.

❓ Frequently Asked Questions (Q&A)

  • Q: What is the primary function of the Converteam GDS1173-6016 board?

    • A: It serves as a power interface and signal routing board designed to manage amplifier and control feedback loops within industrial power conversion equipment.

  • Q: What systems typically utilize this specific interface card?

    • A: It is deployed across legacy Converteam, Alstom, and Cegelec medium-voltage drives, marine propulsion controls, and heavy industrial automation systems.

  • Q: Does this board handle direct high-voltage power switching?

    • A: No, it functions primarily as a low-voltage control and interface module communicating with the heavy power stages via isolated signal paths.

🔍 Recommended Related Series & Models

  • Converteam GDS1173-6010 Power Interface Board

  • Converteam MV7000 Drive Control Board Series

  • Converteam Alspa CE80 Controller Module

  • GE / Converteam EX2100 Excitation Control Board

  • ABB Bailey Infi 90 Power Interface Unit

  • Siemens SIMOVERT Masterdrives Interface Board

  • Rexroth Indramat DIAX Power Section Card

  • Schneider Electric Modicon Quantum I/O Base

  • Woodward 2301D Digital Load Sharing Control

  • Bently Nevada 3500 Monitoring Rack Power Supply

Share this story: