GE Fanuc | IC693MDL310C | 120 VAC 12-Point Output Module

Product Description

The GE Fanuc IC693MDL310C is a 12-point AC discrete output module designed for the Series 90-30 PLC platform. It provides 120 VAC output switching with a maximum rated current of 0.5 A per point.

The module uses triac output technology and is arranged in two groups of six output points. Each group has an electrically separate common, allowing the groups to operate from different AC supply phases or from the same supply, subject to the installation requirements.

Built-in LED indicators provide individual output status information, while group fuse protection helps protect the output circuits. The module is suitable for controlling industrial AC loads such as contactors, interposing relays, indicator lamps, and other compatible devices.

This listing refers to a lot of four modules. Each unit should be checked individually for part number, revision, physical condition, and operating status.

GE Fanuc IC693MDL310C Output 120 VAC 0.5A 12PT Module (Lot of 4) Image 1 of 4

Main Functions and Applications

  • Provides 12 discrete AC output points.
  • Supports 120 VAC industrial control circuits.
  • Uses triac-based electronic output switching.
  • Divides outputs into two groups of six points.
  • Provides separate commons for the two output groups.
  • Includes output status LEDs and fuse indication.
  • Suitable for controlling compatible AC contactors, relays, and indicator devices.
  • Designed for GE Fanuc Series 90-30 PLC systems.

Product Parameters

  • Brand: GE Fanuc
  • Model: IC693MDL310C
  • Product Name: 120 VAC 12-Point AC Output Module
  • Product Series: Series 90-30
  • Module Type: Discrete Output Module
  • Output Points: 12
  • Output Technology: Triac
  • Rated Voltage: 120 VAC
  • Output Voltage Range: 85–132 VAC
  • Frequency: 50/60 Hz
  • Maximum Current per Point: 0.5 A
  • Output Grouping: 2 groups of 6 points
  • Maximum Group Current: 1 A at 60°C; 2 A at 50°C
  • Maximum Inrush Current: 5 A for one cycle
  • Minimum Load Current: 50 mA
  • Maximum Output Voltage Drop: 1.5 V
  • Maximum Leakage Current: 3 mA at 120 VAC
  • On Response Time: 1 ms maximum
  • Off Response Time: 1/2 cycle maximum
  • Backplane Power Consumption: 210 mA from the 5 VDC bus
  • Isolation: 1500 VAC field-to-logic; 500 VAC group-to-group, according to the referenced Series 90-30 specifications
  • Protection: Two 3 A group fuses
  • Product Quantity: Lot of 4
  • Product Condition: Verify actual stock condition
  • Place of Manufacture: Not confirmed
  • Dimensions: Verify against the physical module
  • Weight: Approximately 0.68 kg per module; confirm actual shipment weight
  • Country of Origin: Not confirmed
  • Power Requirements: 5 VDC backplane power; external 120 VAC field supply required
  • Discontinued Status: Legacy Series 90-30 product; current production status not confirmed

Installation and Commissioning

  1. Confirm that the PLC rack is a compatible Series 90-30 baseplate.
  2. Verify the complete catalog number IC693MDL310C and revision marking.
  3. Isolate the PLC rack and external AC field supply before installation.
  4. Check the module connector, terminal block, and backplane contacts for damage.
  5. Install the module in an available I/O slot according to the PLC system documentation.
  6. Connect the external AC supply to the correct group commons and output circuits.
  7. Observe the two separate groups of six outputs when planning field wiring.
  8. Check the load current for each point and each group against the module’s temperature-dependent limits.
  9. Configure the PLC output references according to the Series 90-30 addressing rules.
  10. Restore power and test each output point individually before connecting the module to normal operating loads.

Important: Although the module is described as a 12-point output module, its internal reference layout follows the Series 90-30 addressing convention. Confirm the valid PLC output references in the applicable hardware manual.

Daily Maintenance and Care

  • Inspect the module and terminal connections for signs of overheating.
  • Check field wiring for loose terminals and damaged insulation.
  • Monitor the output status LEDs during normal operation.
  • Investigate the fuse indicator if the red fault LED illuminates.
  • Keep the PLC cabinet clean and properly ventilated.
  • Check external AC supply stability and load current.
  • Inspect connected contactors and relays for excessive inrush current.
  • Keep spare modules in antistatic packaging and a dry storage environment.

Troubleshooting and Common Problems

Problem: Output point does not switch
Check the PLC output command, module seating, external AC supply, field wiring, and connected load.

Problem: Fuse indicator is illuminated
Inspect the affected output group for short circuits, wiring faults, or excessive load current. Isolate power before inspecting or replacing fuses.

Problem: Output LED is ON but the load does not operate
Check the external AC supply, common wiring, load circuit, and terminal connections.

Problem: Intermittent output operation
Inspect loose terminals, damaged field wiring, unstable AC supply, and excessive operating temperature.

Problem: Module reports an output fault
Check group fuse condition, output wiring, load current, and PLC rack connections. Replace the module only after external circuit faults have been ruled out.

Problem: Connected load operates unexpectedly
Check for triac leakage current and compatibility with the connected load. Use an appropriate interface relay where required by the application.

Safety Precautions

  • This is a high-voltage AC output module. Installation and servicing must be performed by qualified personnel.
  • Disconnect both PLC power and external AC field power before handling field wiring.
  • Never exceed the maximum point or group current ratings.
  • Observe the specified ambient-temperature derating requirements.
  • Use the correct fuse type and rating.
  • Do not connect DC loads to the AC output module.
  • Verify terminal assignments and output references before commissioning.

Recommended GE Fanuc Related Models

  1. IC693MDL310 – 120 VAC, 0.5 A, 12-Point AC Output Module
  2. IC693MDL340 – 120 VAC, 0.5 A, 16-Point AC Output Module
  3. IC693MDL330 – 120/240 VAC, 2 A, 8-Point AC Output Module
  4. IC693MDL390 – 120/240 VAC Isolated, 2 A, 5-Point Output Module
  5. IC693MDL730 – 12/24 VDC Positive Logic Output Module
  6. IC693MDL731 – 12/24 VDC Negative Logic Output Module
  7. IC693MDL732 – 12/24 VDC Positive Logic, 0.5 A Output Module
  8. IC693MDL733 – 12/24 VDC Negative Logic, 0.5 A Output Module
  9. IC693MDL740 – 12/24 VDC Positive Logic Output Module
  10. IC693MDL741 – 12/24 VDC Negative Logic Output Module
  11. IC693MDL930 – 8-Point Relay Output Module
  12. IC693MDL931 – 8-Point Relay Output Module
  13. IC693MDL940 – 16-Point Relay Output Module
  14. IC693MDL230 – 120 VAC Isolated Input Module
  15. IC693MDL240 – 120 VAC Input Module

These models belong to the broader GE Fanuc Series 90-30 I/O family. They are related product references, not direct substitutes for IC693MDL310C.

Share this story: