GE | IS200VAICH1D | Mark VI VME Analog Input Board

Product Description

The GE IS200VAICH1D is a VAIC VME Analog Input Board designed for the GE SPEEDTRONIC Mark VI turbine control system. It acquires analog signals from field instruments and processes the data for turbine monitoring, control, and protection functions.

The board interfaces with the Mark VI VME control rack and associated analog terminal boards. It supports analog signal acquisition for applications such as pressure, temperature, flow, and other process measurements. Depending on the system configuration, it can be used in simplex or Triple Modular Redundant (TMR) architectures.

The IS200VAICH1D is used in gas turbine, steam turbine, and power-generation control systems. It is suitable for maintenance, replacement, and repair of existing Mark VI installations.

Product Parameters

  • Brand: General Electric (GE)
  • Model: IS200VAICH1D
  • Product Name: VAIC VME Analog Input Board
  • Series: SPEEDTRONIC Mark VI
  • Board Type: VME Analog Input / VAIC Board
  • Functional Revision: D
  • System Interface: VME Backplane
  • Terminal Board Interface: Compatible terminal board configuration must be verified
  • System Architecture: Simplex / TMR, subject to system configuration
  • Signal Types: Refer to the approved Mark VI hardware documentation
  • Place of Manufacture: Not confirmed
  • Product Status: Seller refurbished, according to the supplied listing
  • Dimensions: Not specified
  • Weight: Not specified
  • Country of Origin: Verify the individual unit
  • Power Requirements: Refer to the GE Mark VI hardware documentation
  • Discontinued: Current lifecycle status to be confirmed

Main Applications

  • GE Mark VI gas turbine control systems
  • Steam turbine monitoring and control
  • Analog process signal acquisition
  • Turbine temperature and pressure monitoring
  • Flow and process measurement
  • Power plant automation and protection
  • Simplex and TMR turbine control installations

Installation and Commissioning

  1. Confirm the complete part number and revision against the existing board and system documentation.
  2. Verify the compatible analog terminal board and cable arrangement before installation.
  3. Isolate the equipment according to the plant’s approved maintenance procedure.
  4. Inspect the VME rack slot, backplane connectors, and board contacts.
  5. Install the board in the designated Mark VI rack position.
  6. Check board status indicators and controller diagnostics after power-up.
  7. Verify analog channel readings against known field instrument values.
  8. Confirm signal scaling, alarm thresholds, and control-system diagnostics before returning the equipment to service.

For TMR installations, verify the corresponding channel and controller status across all configured control sections.

Daily Maintenance and Care

  • Monitor board status and system diagnostic messages.
  • Check analog input readings for abnormal fluctuations or signal loss.
  • Inspect terminal board connections and cables during scheduled maintenance.
  • Keep the VME rack clean and adequately ventilated.
  • Check for signs of overheating, corrosion, or physical damage.
  • Maintain records of board revisions, channel assignments, and replacement history.

Troubleshooting and Common Problems

  • Board not recognized: Check rack seating, backplane contacts, and part-number compatibility.
  • Incorrect analog readings: Verify field wiring, terminal board connections, signal type, and scaling configuration.
  • Unstable input signals: Inspect cable shielding, grounding, and field instrument output.
  • Board fault indication: Review Mark VI diagnostics and inspect the board and rack connections.
  • TMR channel disagreement: Compare channel readings and diagnostic status across the redundant control sections.
  • Communication or data transfer issue: Check the VME backplane and associated control-system modules.

Safety Precautions

  • Installation and servicing should be performed by qualified turbine-control technicians.
  • Follow plant isolation and safety procedures before handling the board.
  • Do not remove or insert the module under power unless the system documentation explicitly permits it.
  • Use ESD protection when handling electronic assemblies.
  • Verify terminal board compatibility and system configuration before commissioning.
  • Complete all required control-system checks before returning the turbine to operation.

Recommended GE Models and Related Products

The following GE Mark VI boards and components are related to turbine control, signal acquisition, and system communication. They are not all direct replacements for the IS200VAICH1D.

  1. IS200VAICH1DAA – VAIC analog I/O board variant.
  2. IS200VRTDH1D – VME RTD input board.
  3. IS200VTCCH1C – VME thermocouple input board.
  4. IS200VSVOH1B – VME servo control board.
  5. IS200VVIBH1C – VME vibration monitoring board.
  6. IS200VCRCH1B – Contact input and relay board.
  7. IS200VTURH1B – VME turbine control board.
  8. IS200VCMIH2B – VME communication interface board.
  9. IS200TBAI – Analog input terminal board family.
  10. IS200TBAIH1C – Analog input terminal board variant; verify compatibility.
  11. IS200TBAT – Analog termination board family.
  12. IS200TRLYH1B – Relay output board family.
  13. IS200TBCI – Contact input terminal board family.
  14. IS200TBAO – Analog output terminal board family.
  15. IS200RCSH1A – Mark VI control system board family; verify the required application and revision.

Frequently Asked Questions

Q1: What is the GE IS200VAICH1D used for?

A1: It is a VME analog input board for the GE Mark VI turbine control system. It acquires analog process signals for turbine monitoring and control.

Q2: Is the IS200VAICH1D compatible with Mark VI systems?

A2: Yes. It is identified as a Mark VI VAIC board. The exact rack, terminal board, and revision compatibility should still be checked before installation.

Q3: Can it be used in a TMR configuration?

A3: The VAIC board is used in Mark VI simplex and TMR configurations, depending on the system design and associated hardware.

Q4: Does the board connect directly to field instruments?

A4: Field wiring is normally connected through the associated analog terminal board. The VAIC board interfaces with the terminal board through the system’s specified cabling arrangement.

Q5: Is IS200VAICH1D interchangeable with IS200VAICH1DAA?

A5: They are related VAIC board designations, but suffix differences can indicate hardware or assembly variations. Confirm the complete part number and approved compatibility before substitution.

Q6: What should be checked before ordering?

A6: Check the full model number, revision, board condition, terminal board compatibility, and the requirements of the installed Mark VI system.

Share this story: