GE Multilin F60 Feeder Management Relay Front Display Panel & Rack

GE Multilin F60 Feeder Management Relay Front Display Panel & Rack (No PLC Modules)

📌 Product Overview
The GE Multilin F60 is a feeder management relay designed to protect and control power distribution feeders. It features a front display panel that provides clear real‑time data on voltage, current, frequency, and power conditions. The unit comes without PLC modules, so it fits into existing protection racks with spare I/O capacity. The front panel uses easy‑to‑read LED indicators and a simple keypad interface. It shows alarms, device status, and basic waveform snapshots. The F60 relay not only monitors feeder health but also reacts quickly to faults. It can trip breakers to isolate problems and help restore service faster. It supports standard CT and VT connections and accepts both analog and digital inputs.

GE Multilin F60 Feeder Management Relay Front Display Panel& Rack NO PLC MODULES

⚙️ Technical Specifications
The F60 relay measures up to six current inputs and six voltage inputs. It provides directional overcurrent protection, voltage protection, and arc flash detection. The front display shows up to four parameters at once. The relay housing fits a 19‑inch rack and uses a standard 3U height. It operates on 110–240 VAC or 24 VDC power and consumes less than 10 W. The user interface includes a four‑line alphanumeric display and six push buttons. It has two independent trip outputs and one configurable relay output. The relay records up to 10 event logs and ten oscillography records. It also stores up to 30 fault reports in flash memory for post‑mortem analysis. The firmware supports remote firmware updates via a SCADA link or local USB port.

🛠️ Design and Integration
The F60 relay installs easily in GE’s SR 480 and SR 490 racks without PLC modules. It uses quick‑connect wiring harnesses for current and voltage inputs. The front panel snaps into place and locks with side screws. The keypad and display module detach for bench programming. The device works with companion tools like EnerVista Integrator and Relay Assistant for configuration and testing. It sends DNP3 or Modbus RTU messages over serial or Ethernet. The relay also supports IEC 61850 communication for substation automation. Its solid‑state design resists vibration and harsh temperatures from –20 °C to 70 °C. It meets ANSI and IEEE standards for relay performance and safety.

📰 Industry News
Power utilities are upgrading distribution networks to enhance reliability and support renewable integration. Many operators choose advanced feeder management relays like the F60 to improve grid resilience. Recent reports show that faster fault detection and isolation can cut outage times by more than 30 percent. In North America, utilities are replacing legacy electromechanical devices with digital relays. This shift helps meet stricter regulatory requirements for outage reporting and asset health monitoring. Grid operators also use relay data streams to feed analytics platforms for predictive maintenance. These platforms flag anomalies before faults occur, reducing unplanned downtime. The GE Multilin F60 remains a popular choice because it balances advanced protection features with simple front‑panel access.

🔗 For more details and ordering, visit:
https://www.fy-module.com/
https://www.fy-module.com/product/

📋 Recommended Similar Product Models

Model Number Description Communication Mounting Type
GE Multilin F35 Feeder Relay with Breaker Health Monitoring Modbus RTU, DNP3 19″ Rack, 3U
GE Multilin F60X Enhanced F60 with PLC I/O Expansion IEC 61850, Ethernet 19″ Rack, 3U
GE Multilin L90 Line Current Differential Relay IEC 61850, RS‑485 19″ Rack, 4U
GE Multilin K80 Transformer Protection Relay Modbus RTU 19″ Rack, 3U
GE Multilin P40 Substation Automation Controller IEC 61850, DNP3 Panel Mount

🏭 About Zhangzhou Fengyun Electric Equipment Co., Ltd.
Zhangzhou Fengyun Electric Equipment Co., Ltd. offers a wide range of industrial control products. The company specializes in automation devices from major European and American brands. Fengyun Electric has strong technical capabilities and advanced testing facilities. It handles import‑export trade and serves clients in power, oil & gas, water treatment, and manufacturing sectors. The company provides end‑to‑end solutions, from system design to commissioning and after‑sales support.

📞 Contact Information
Sales Engineer Amy
Phone: 15359029662
Email: geabbamy@gmail.com

Share this story: