GUTOR Electronics | OM-94035B Front Panel Interface

The GUTOR OM-94035B (Part Number: 0021004-2) is a specialized front panel display and interface module designed for Gutor’s industrial Uninterruptible Power Supply (UPS) systems, such as the PEW and PDW series. This component serves as the primary human-machine interface (HMI), allowing operators to monitor critical power parameters, view alarm status, and perform system configuration within mission-critical environments like oil & gas, nuclear power, and large-scale industrial manufacturing.

⚙️ Technical Parameters and Specifications

  • Part Number: 0021004-2 (Compatible with OM-94035B series)

  • Function: Operator Display & Control Panel (HMI)

  • Compatibility: Gutor PEW and PDW series UPS systems

  • Display Type: LCD/LED Status Indicator Panel (Varies by revision)

  • Operating Voltage: Powered directly by the UPS control circuit (typically 24V DC)

  • Dimensions: Standard front panel cutout dimensions for Gutor UPS cabinets

  • Weight: Approximately 0.4 kg

  • Country of Origin: Switzerland

🏭 Application Areas

  • Industrial UPS Systems: Primary control and monitoring interface for Gutor PDW/PEW uninterruptible power supplies.

  • Mission-Critical Power: Used in hazardous areas and high-reliability industrial plants requiring continuous power monitoring.

  • Fault Diagnostics: Enables rapid local identification of system alarms, battery health, and inverter status during maintenance.

  • System Management: Allows for manual control of system operations and configuration of alarm relay outputs.

  • GUTOR Electronics PEW/PDW OM-94035B Front Panel 0021004-2 - New Without Box

📖 Product User Guide

Installation must be conducted by trained technicians familiar with Gutor UPS maintenance. When replacing the Gutor OM-94035B, ensure the UPS is in a safe, controlled state (usually bypassed or shut down depending on site safety protocols). Disconnect the communication ribbons or connectors from the rear of the existing panel. Carefully remove the damaged unit, insert the new panel, and secure it using the provided mounting hardware. Reconnect the interface cables, ensuring they are fully seated. Once powered up, verify the display initializes correctly and that all LEDs perform a self-check sequence. Use the navigation buttons to confirm real-time data matches the system status.

❓ Frequently Asked Questions (Q&A)

Why would I need to replace the OM-94035B panel? Common reasons include screen flickering, unresponsive buttons, or burnt-out status LEDs. Since this is the primary point of contact for operators, a malfunctioning panel can prevent critical information from reaching the maintenance team during a power event.

Is this panel “plug-and-play” with all PEW/PDW systems? While the 0021004-2 is specific to the OM-94035B series, Gutor UPS systems often have custom software configurations. Always ensure the panel revision matches the firmware version of your UPS control board to guarantee complete compatibility.

What should I do if the panel shows “Communication Fault”? This usually indicates a break in the communication link between the UPS control cabinet and the front panel. Check the ribbon cable connections between the CPU board and the front panel. If the cables are secure, the issue may lie within the controller board itself.

📋 Recommended Similar Models

  1. Gutor OM-94035A (Earlier revision of the front panel interface)

  2. Gutor PDW Series Control Logic Cards

  3. Gutor PEW Series Management Modules

  4. ABB UPS Control Interface Boards (Similar industrial UPS technology)

  5. Eaton Industrial UPS Display Modules (Alternative for power monitoring)

Share this story:

Discover more