Honeywell EZV516 MSI Board 24V/N/04

Technical Parameters of Honeywell EZV516 MSI Board 24V/N/04

1. General Overview

The Honeywell EZV516 MSI Board 24V/N/04 is a high – quality component designed for integration into various industrial and building automation systems. It plays a crucial role in signal processing, control, and communication functions within these systems, ensuring reliable and efficient operation.

2. Power Supply Specifications

  • Input Voltage:
    • The board operates on a 24V DC power supply. This standard voltage level is widely used in industrial control applications, providing a stable and consistent power source for the board’s internal circuitry.
  • Power Consumption:
    • The exact power consumption value may vary depending on the operating conditions and the connected load. However, it is designed to be energy – efficient, with a typical power consumption range that ensures minimal impact on the overall power budget of the system. For example, under normal operating conditions, it may consume around [X] watts of power.

3. Input/Output (I/O) Capabilities

  • Digital Inputs:
    • The EZV516 MSI Board 24V/N/04 is equipped with a set of digital inputs. These inputs are used to receive signals from various sensors, switches, and other digital devices in the system. The number of digital inputs may range from [Y1] to [Y2], and they are typically designed to accept 24V DC signals. The inputs have high – impedance characteristics, which prevent excessive current draw from the connected devices and ensure accurate signal detection.
  • Digital Outputs:
    • It also features digital outputs that can be used to control actuators, relays, and other digital devices. The number of digital outputs usually ranges from [Z1] to [Z2]. These outputs can provide a 24V DC signal with a specified current – carrying capacity, allowing them to drive a variety of loads. For instance, each output may be able to source or sink a current of up to [A] mA.
  • Analog Inputs/Outputs (if applicable):
    • Although the specific model may or may not have analog I/O, if present, the analog inputs can accept a range of voltage or current signals. For example, an analog input may be designed to accept a 0 – 10V DC or 4 – 20mA signal, providing a high – resolution representation of the measured physical quantity. The analog outputs can generate corresponding voltage or current signals to control analog devices such as variable – speed drives or positioners.

4. Communication Features

  • Communication Protocols:
    • The board supports various communication protocols to enable seamless integration with other devices in the system. Common protocols may include Modbus RTU, Modbus TCP/IP, or BACnet (depending on the specific application requirements). These protocols allow for the exchange of data between the EZV516 MSI Board and other controllers, sensors, and human – machine interfaces (HMIs).
  • Communication Interface:
    • It is equipped with a suitable communication interface, such as an RS – 485 port for Modbus RTU communication or an Ethernet port for Modbus TCP/IP or BACnet over IP communication. The RS – 485 interface provides reliable long – distance communication with multiple devices on a single bus, while the Ethernet interface offers high – speed data transfer and easy integration into local area networks (LANs).

5. Environmental Specifications

  • Operating Temperature:
    • The recommended operating temperature range for the Honeywell EZV516 MSI Board 24V/N/04 is from [D1]°C to [D2]°C. This temperature range ensures that the board can operate reliably in a variety of industrial and building environments, including those with temperature fluctuations.
  • Storage Temperature:
    • When not in use, the board should be stored within a temperature range of [S1]°C to [S2]°C to prevent damage to its internal components.
  • Humidity:
    • It can operate in environments with a relative humidity of up to [E]% (non – condensing). Proper ventilation and moisture – proofing measures should be taken to prevent moisture from entering the board and causing electrical failures.

6. Mechanical Specifications

  • Dimensions:
    • The physical dimensions of the board are compact, with a length of [L] mm, a width of [W] mm, and a thickness of [H] mm. This compact design allows for easy installation in control panels and other enclosures with limited space.
  • Mounting:
    • It can be mounted using standard DIN rail mounting or panel mounting methods, providing flexibility in installation according to the specific requirements of the system.

7. Certifications and Compliance

  • Industry Standards:
    • The board is designed to comply with relevant industry standards, such as those related to electromagnetic compatibility (EMC), safety, and environmental regulations. This ensures that it can be used in a wide range of applications without causing interference to other devices or posing a safety hazard.
  • Certifications:
    • It may hold certifications from recognized certification bodies, such as UL (Underwriters Laboratories) or CE (Conformité Européenne), which provide assurance of its quality and compliance with international standards.

In summary, the Honeywell EZV516 MSI Board 24V/N/04 is a well – designed and versatile component that offers reliable I/O capabilities, communication features, and environmental and mechanical specifications, making it suitable for a variety of industrial and building automation applications.

Share this story:

Discover more