KONGSBERG 600309 | SPBUS-HUB High-Speed Communication Module

The KONGSBERG 600309 is a high-performance SPBUS-HUB Module designed for seamless data distribution and network management within the Kongsberg maritime and industrial control ecosystems. As a critical node in the SPBUS architecture, this module ensures reliable communication between workstations, controllers, and peripheral devices, maintaining system integrity even in demanding environments.

Product Specifications

  • Manufacturer: Kongsberg Maritime

  • Model Number: 600309

  • Part Name: SPBUS-HUB Module

  • Communication Protocol: SPBUS (Special Purpose Bus)

  • Operating Voltage: 24V DC (typical)

  • Dimensions: 145mm x 120mm x 45mm

  • Weight: 0.85 kg

  • Country of Origin: Norway

Application Fields

The SPBUS-HUB is primarily utilized in large-scale integrated automation systems (IAS). Its main application areas include:

  • Maritime Propulsion Control: Distributing signals between bridge consoles and engine room controllers.

  • Dynamic Positioning (DP) Systems: Ensuring redundant communication paths for vessel positioning sensors.

  • Offshore Drilling Rigs: Managing complex sensor networks in hazardous environments.

  • Power Management Systems (PMS): Coordinating data flow between generators and switchboards.

Operating Instructions

  1. Mounting: Ensure the module is securely attached to a standard DIN rail or specific Kongsberg sub-rack. Maintain adequate ventilation space around the unit.

  2. Wiring: Connect the 24V DC power supply to the designated terminals. Use shielded twisted-pair cables for SPBUS connections to minimize electromagnetic interference.

  3. Configuration: The module is generally “plug-and-play” within a pre-configured Kongsberg environment. However, ensure that the node address (if applicable) is set correctly via the onboard DIP switches or software interface.

  4. Status Monitoring: Observe the LED indicators on the front panel. A steady green light typically indicates healthy power and active communication.

KONGSBERG SPBUS-HUB MODULE 600309 REV A1

Q&A: Frequently Asked Questions

Q: Can this hub be used with standard Ethernet equipment? A: No. The 600309 uses the proprietary SPBUS protocol. While it physically resembles some networking hardware, it is only compatible with Kongsberg-certified SPBUS devices.

Q: Does the module require periodic calibration? A: No calibration is required. It is a digital communication device. Routine maintenance should focus on checking cable tightness and ensuring the environment remains within specified temperature limits.

Q: What should I do if the “Error” LED flashes? A: This usually indicates a collision on the bus or a disconnected node. Check all cable terminations and ensure the bus is properly terminated at both ends with the correct resistance.

Recommended Similar Models

  • KONGSBERG 600310 (SPBUS Extension Module)

  • KONGSBERG 600895 (RBUS-HUB Interface)

  • KONGSBERG 701352 (Remote I/O Processor)

  • KONGSBERG 600312 (Dual Port SPBUS Controller)

  • KONGSBERG 600550 (Network Bridge Unit)

Share this story:

Discover more