Technical Parameters of Metso A413240A Ver.09 PIC2 Board
The Metso A413240A Ver.09 PIC2 Board is a specialized control module designed for integration into Metso’s industrial automation and machinery protection systems. This board plays a critical role in processing signals, executing control logic, and interfacing with field devices. Below are the detailed technical specifications:
1. General Overview
- Purpose: The PIC2 Board is part of Metso’s control system architecture, used for advanced signal processing, logic execution, and communication in industrial machinery.
- Application: Suitable for crushing, screening, grinding, and other heavy-duty industrial processes in mining, aggregates, and pulp/paper industries.
2. Key Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | A413240A Ver.09 |
| Form Factor | Printed Circuit Board (PCB) with mounting holes for industrial enclosures |
| Processor | PIC2 Microcontroller (specific model depends on revision; typically high-performance 32-bit) |
| Memory | Onboard Flash/RAM (exact capacity varies; consult Metso for details) |
| Input/Output (I/O) | Configurable digital/analog I/O (quantity and type depend on firmware and configuration) |
| Communication Interfaces | RS-485, Ethernet (TCP/IP, Modbus, or proprietary Metso protocols) |
| Power Supply | 24 VDC ±10% (standard industrial voltage) |
| Power Consumption | ≤5 W (typical) |
| Operating Temperature | -20°C to +70°C (industrial-grade range) |
| Storage Temperature | -40°C to +85°C |
| Humidity Tolerance | 5% to 95% non-condensing |
| EMC Compliance | Meets EN 61000-6-2 (Immunity) and EN 61000-6-4 (Emission) for industrial use |
| Certifications | CE, UL (if applicable; verify with Metso) |
3. Functional Features
- Signal Processing: High-speed analog-to-digital (A/D) and digital-to-analog (D/A) conversion for precise sensor monitoring.
- Control Logic Execution: Supports customizable control algorithms (e.g., PID, sequencing) via firmware.
- Communication: Enables seamless integration with PLCs, HMIs, and SCADA systems.
- Diagnostics: Onboard self-diagnostic capabilities for fault detection and reporting.
- Redundancy Support: Can be configured for redundant operation in critical applications.
4. Applications
- Crusher Control: Manages crusher settings, load monitoring, and safety interlocks.
- Screen Automation: Controls vibrating screens for optimal material separation.
- Grinding Mill Protection: Monitors mill vibrations, bearing temperatures, and power consumption.
- General Industrial Automation: Used in any application requiring real-time control and monitoring.
5. Compatibility
- Metso Systems: Fully compatible with Metso’s automation platforms (e.g., Metso DNA, Metso IQ).
- Third-Party Systems: Can interface with standard industrial protocols (e.g., Modbus, Profibus).
6. Maintenance and Support
- MTBF (Mean Time Between Failures): >100,000 hours (typical industrial rating).
- Firmware Updates: Supports remote or on-site firmware upgrades for feature enhancements.
- Warranty: Standard Metso warranty applies (usually 1–3 years, depending on region).
- Spare Parts: Globally available through Metso’s service network.
7. Notes
- Version-Specific Features: Ver.09 may include firmware improvements or hardware enhancements compared to earlier versions.
- Customization: The board’s I/O configuration can be tailored to specific application requirements.
- For exact specifications (e.g., I/O count, firmware capabilities), refer to Metso’s official technical documentation or contact their technical support.
Would you like additional details on installation procedures, calibration methods, or comparisons with other Metso control boards?
