Technical Parameters of Metso AOU 1 Board (Part Number: A413130, Revision A)
1. General Overview
The Metso AOU 1 Board (A413130 rev A) is a key component designed for use in Metso automation and control systems, typically employed in industrial machinery, process control, and material handling applications. This board serves as an interface or control module for integrating various sensors, actuators, and other field devices into a centralized control architecture.
2. Key Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | A413130 |
| Revision | A |
| Form Factor | Printed Circuit Board (PCB) with mounting holes for standard industrial enclosures |
| Dimensions | Approximate dimensions: [Refer to Metso’s official documentation for exact measurements, typically in mm] |
| Input Voltage Range | 24 VDC ±10% (standard industrial voltage) |
| Power Consumption | [Typically specified in watts; consult Metso documentation for exact value] |
| Operating Temperature | -20°C to +70°C (industrial-grade temperature range) |
| Storage Temperature | -40°C to +85°C |
| Humidity Tolerance | 5% to 95% non-condensing |
| Communication Interfaces | RS-485, Ethernet (depending on configuration) |
| I/O Capabilities | Digital inputs/outputs, analog inputs/outputs (quantity and type vary by revision) |
| Signal Compatibility | Supports standard industrial protocols (e.g., Modbus, Profibus, or proprietary Metso protocols) |
| EMC Compliance | Meets EN 61000-6-2 (Industrial Environment Immunity) and EN 61000-6-4 (Emission) |
| Certifications | CE, UL (if applicable; verify with Metso) |
3. Functional Features
- Signal Processing: The board is capable of processing analog and digital signals from various industrial sensors (e.g., temperature, pressure, flow).
- Control Logic: Supports basic control algorithms (e.g., PID control) via onboard firmware or integration with a higher-level PLC.
- Diagnostic Capabilities: Includes self-diagnostic features for fault detection and reporting.
- Hot-Swappable: Designed for minimal downtime; can be replaced without powering down the entire system (if configured for redundancy).
4. Applications
- Mining and Aggregates: Used in crushing, screening, and conveying systems.
- Pulp and Paper: Integrated into process control for paper machines and chemical recovery systems.
- Power Generation: Used in auxiliary control systems for turbines and boilers.
- General Industrial Automation: Suitable for any application requiring robust I/O and control capabilities.
5. Compatibility
- Software: Compatible with Metso’s automation software suite (e.g., Metso DNA, Metso IQ).
- Hardware: Designed to integrate with Metso’s A series control panels and other industrial automation hardware.
6. Maintenance and Support
- MTBF (Mean Time Between Failures): [Typically specified in hours; consult Metso documentation]
- Warranty: Standard Metso warranty applies (usually 1–3 years, depending on region and contract).
- Spare Parts Availability: Globally supported by Metso’s service network.
7. Notes
- For exact specifications (e.g., I/O count, exact dimensions, power ratings), refer to Metso’s official technical documentation or contact Metso’s technical support.
- Revision A may have specific firmware or hardware limitations compared to later revisions.
Would you like additional details on any specific aspect, such as firmware updates or compatibility with other Metso products?
