You are here:
Product code: N/A

General Electric | DS200PTBAG1A | RST Turbine Protection Termination Board

Original price was: ¥99,999.00.Current price is: ¥1,588.00.

This image and price are not for reference. If you need to inquire, please contact me!

🌍Country of origin: USA France Germany Estonia Norway UK

⌚Delivery date: in stock

🛠After-sales service: brand new with one year warranty

⚙️ Product Category: Module/Controller/Server/Motor/Touch Screen

🕰Warranty: 12 months/365 days

☎️ Please contact me: 15359029662 Ms. Amy Sun

📎Chinese official website: www.dcsplcabb.com

📩Email: geabbamy@gmail.com

💬Whatsapp: +86 15359029662 

If you have any products that you cannot find, you can consult anytime.

Detailed content

Product Introduction

The GE DS200PTBAG1A RST Termination Board is a printed circuit board associated with the GE Mark V SPEEDTRONIC turbine control system. The PTBA board provides termination and routing for critical turbine protection signals, connecting field wiring and protection-related signals to the appropriate control and protection circuitry. <Cite refs={[“turn360814search1″,”turn360814search4”]}/>

Typical signal connections in the PTBA family include turbine shaft-speed pickups, flame detection, generator and bus voltage signals, generator current signals, and trip-related interfaces. The board supports the Mark V protective core architecture used in industrial gas and steam turbine applications. <Cite refs={[“turn360814search3″,”turn360814search9”]}/>

The listed unit is identified as DS200PTBAG1A, Revision DC, with serial number 14055E. Verify the complete board number, functional revision, artwork revision, and installed cabinet configuration before ordering, as these details are important when replacing legacy turbine-control hardware.

Key Features

  • Manufacturer: General Electric (GE)
  • Model: DS200PTBAG1A
  • Revision: Rev DC, as stated in the listing
  • Series: Mark V SPEEDTRONIC
  • Product Type: Turbine Protection Termination Board
  • Primary Function: Termination and routing of protection-related signals
  • Typical Signals: Shaft speed, flame detection, generator and bus measurements, and trip interfaces
  • System Integration: Compatible Mark V protective-core architecture
  • Application: Gas turbine, steam turbine, and power-generation control systems
  • Serial Number: 14055E

Product Datasheet

Parameter Specification
Brand General Electric (GE)
Model DS200PTBAG1A
Revision Rev DC, according to the listing
Series Mark V SPEEDTRONIC
Product Name RST Turbine Protection Termination Board
Product Type Protection Signal Termination Board
Place of Manufacture / Origin United States, commonly listed; verify the nameplate
Product Status Confirm with seller
Dimensions Approx. 28.8 × 7.2 × 3.8 cm for the documented board family; verify exact revision
Weight Approx. 0.32 kg for the documented board family; verify actual unit
Country of Origin Verify product label
Power Requirements Installed-system dependent; confirm the applicable GE documentation
Signal Interfaces Protection, speed, flame-detection, generator/bus measurement, and trip-related connections
Serial Number 14055E
Discontinued Current lifecycle status not independently verified

Installation and Compatibility Notes

  1. Confirm the complete part number and revision markings on the physical board before installation.
  2. Verify that the installed control system uses the compatible GE Mark V protective-core arrangement.
  3. Document all terminal assignments, ribbon-cable connections, and jumper positions before removing the existing board.
  4. Inspect terminal blocks, connectors, solder joints, and PCB surfaces for damage or corrosion.
  5. Check compatibility with associated protection and interface boards using the applicable GE wiring diagrams.
  6. After replacement, carry out the required signal checks and protection-system functional tests under approved site procedures.

Because the PTBA family can handle critical turbine protection signals, installation should be performed by qualified personnel. Do not assume that a board with a similar base number is interchangeable without confirming the complete revision and configuration.

Frequently Asked Questions

Q1: What is the DS200PTBAG1A used for?

It provides termination and routing for protection-related signals within compatible GE Mark V turbine control systems.

Q2: What signals can be connected to this board family?

Documented applications include shaft-speed pickup signals, flame detection, generator and bus voltage/current signals, and trip-related interfaces. The exact terminal assignment must be checked against the installed revision’s documentation.

Q3: Is this a processor board?

No. It is a termination and interface board rather than the main controller responsible for executing turbine-control logic.

Q4: What does Revision DC mean?

The listing states Rev DC. The exact interpretation of the functional and artwork revision should be verified from the physical board markings and applicable GE documentation.

Q5: Can it be used in a Mark VIe system?

The DS200PTBAG1A is associated with the Mark V platform. It should not be assumed compatible with Mark VIe, which uses a different hardware architecture.

Q6: What should I verify before purchasing?

Check the full part number, revision, serial number, terminal layout, connector arrangement, physical condition, and compatibility with the installed Mark V cabinet.

Recommended Related GE Models and Components

The following parts are related to GE Mark V turbine-control and protection systems. They perform different functions and are not direct substitutes unless the installed configuration and documentation confirm compatibility.

  1. DS200PTBAG1A — PTBA turbine protection termination board.
  2. DS200PTBAG1B — Related PTBA board revision; verify interchangeability.
  3. TCEB — Core extender board associated with protection-signal interfaces.
  4. TCTG — Turbine trip board used in compatible Mark V protective-core configurations.
  5. TCQE — Quadruple extender board associated with shaft-speed signal interfaces.
  6. DS200QTBAG1A — QTBA termination board for a different system function.
  7. DS200RTBAG1A — Relay/termination board family.
  8. DS200CTBAG1A — CTBA analog termination board family.
  9. DS200DTBAG1A — Digital contact termination board family.
  10. DS200TBQAG1A — Mark V termination board family; verify its specific application.
  11. DS200TBQCG1A — RST analog termination board family.
  12. DS200TBQBG1A — RST termination board variant.
  13. IS200BPVCG1BR1 — GE control-system backplane assembly; verify platform compatibility.
  14. IS200VTURH1B — GE turbine-control I/O board.
  15. IS220PTURH1A — GE Mark VIe primary turbine protection I/O pack; not a direct Mark V replacement.

Purchasing Reminder

Before ordering, confirm that the required part is DS200PTBAG1A Rev DC, serial number 14055E. Request photographs of the actual PCB label and connectors, and verify the terminal configuration and revision against the installed equipment documentation. Product condition, testing status, warranty, and return terms should be confirmed with the seller.