The JOWA CLEANTOIL 9000 Oil Discharge Monitoring Analysing Unit is a marine oil content measuring device designed for shipboard Oil Discharge Monitoring Equipment (ODME) systems. It continuously analyzes sample water from vessel discharge systems and provides oil concentration measurement, discharge monitoring, alarm functions, and compliance recording for marine environmental protection applications.

The analysing unit is a key component of the JOWA CLEANTOIL 9000 system and works together with the computer unit, converting unit, and sample pump. It measures oil content in the sample flow and sends measurement data to the control unit for calculation of oil discharge rate and total discharged oil quantity.

The CLEANTOIL 9000 system is widely used on tankers and commercial vessels to support MARPOL Annex I oil discharge monitoring requirements. The analysing unit is installed in hazardous areas such as pump rooms and is designed for continuous marine operation.

📌 Product Parameters

📌 Product Datasheet

📌 Common Questions & Answers

❓ Q: What is the main function of the JOWA CLEANTOIL 9000 Analysing Unit?
A: It measures oil concentration in sample water and provides data to the CLEANTOIL control system for discharge monitoring and alarm processing.

❓ Q: Which system uses this analysing unit?
A: It is designed specifically for the JOWA CLEANTOIL 9000 Oil Discharge Monitoring Equipment system.

❓ Q: What information does the CLEANTOIL 9000 system calculate?
A: The system calculates oil content, instantaneous oil discharge rate, and total discharged oil quantity during vessel operation.

❓ Q: Where is the analysing unit installed?
A: It is normally installed in the pump room or another suitable hazardous area close to the sampling point.

❓ Q: What are common failure symptoms?
A: Typical issues include inaccurate oil readings, unstable measurement values, sample flow alarms, sensor faults, or communication problems with the computer unit.

❓ Q: What should be checked before replacement?
A: Verify the complete CLEANTOIL 9000 system configuration, analysing unit part number, wiring, sample piping, calibration settings, and vessel installation requirements.

📌 Recommended JOWA Models

1. JOWA CLEANTOIL 9000 Computer Unit – Main processing and recording controller for ODME system.
2. JOWA CLEANTOIL 9000 Converting Unit – Signal conversion and power interface unit.
3. JOWA CLEANTOIL 9000 Sample Feed Pump Unit – Marine sample circulation pump assembly.
4. JOWA CLEANTOIL 9000 Oil Content Meter – Complete oil discharge monitoring system.
5. JOWA OCM-15 Oil Content Meter – Marine oil monitoring equipment.
6. JOWA OCM-200 Oil Content Monitor – Advanced marine discharge monitoring unit.
7. JOWA Bilge Water Monitoring System – Shipboard oily water monitoring equipment.
8. JOWA Oil Mist Detector Systems – Marine engine safety monitoring products.
9. JOWA Marine Sensors and Transmitters – Ship automation measurement components.
10. JOWA ODME Control Modules – Oil discharge monitoring control components.
11. JOWA Sample Pump Assembly – Replacement pump components for ODME systems.
12. JOWA Measuring Cell Assembly – Oil concentration measurement components.
13. JOWA Marine Environmental Monitoring Systems – Ship pollution monitoring solutions.
14. JOWA Oily Water Separator Monitoring Components – Marine discharge control spare parts.
15. JOWA CleanOil Series Spare Modules – Complete ODME maintenance components.