You are here:
  1. Home
  2. Product
  3. In stock
  4. UNC532 S-532-N| INVENSYS|Control Power Module
Product code: N/A

UNC532 S-532-N| INVENSYS|Control Power Module

Original price was: ¥66,666.00.Current price is: ¥1,450.00.

The INVENSYS UNC532 S-532-N F/W V5G 115/230VAC 50/60Hz 24VA is a durable and reliable control power module for DCS and process automation systems. Its industrial design, protective features, and stable AC output make it ideal for powering controllers, I/O modules, and auxiliary devices in critical industrial applications.

Detailed content

¡Debido a que el inventario es muy grande, no hay forma de que cada producto proporcione fotos reales, ¡ por favor, perdóname!

لأن كمية المخزون كبيرة جدا ، لا يمكن أن توفر كل منتج صورة حقيقية ، يرجى أن يغفر لي !

Поскольку запасы очень большие, нет способа предоставить реальные фотографии каждого продукта, пожалуйста, извините!

Due to the large inventory, it is not possible to provide authentic photos for every product. We apologize for any inconvenience caused!

 

INVENSYS UNC532 S-532-N F/W V5G 115/230VAC 50/60Hz 24VA — Control Power Module

Product Introduction

The INVENSYS UNC532 S-532-N is a reliable control power module designed for Invensys process automation and distributed control systems (DCS). With firmware version V5G and dual voltage support, this module provides a regulated 24VA output to power controllers, I/O modules, and auxiliary devices within the system. Engineered for industrial environments, it ensures stable operation across a wide input voltage range and supports both 50/60Hz AC mains.

The UNC532 module is ideal for powering sensitive control electronics where consistent voltage and minimal ripple are critical to reliable system operation.

Product Parameters

  • Module Type: Control Power / Power Supply Module
  • Model: UNC532 S-532-N
  • Firmware Version: V5G
  • Input Voltage: 115/230VAC
  • Frequency: 50/60Hz
  • Output Power: 24VA
  • Mounting Type: Panel or rack-mounted within DCS cabinets
  • Operating Mode: Continuous industrial operation
  • Application Focus: Stable control power for DCS and process automation systems

Product Specifications

  • Input Range: 95–265VAC (universal input)
  • Output Voltage: Regulated 24V AC
  • Output Current: Up to 1A (depending on load)
  • Efficiency: >85% typical
  • Protection Features: Overload, short-circuit, and thermal protection
  • Isolation: Full galvanic isolation between input and output
  • Temperature Rating: Industrial operating range (-20°C to +70°C typical)
  • Indicators: LED status for power OK and fault detection
  • Certifications: Designed to meet industrial safety and EMC standards

Application Areas

  • Distributed control systems (DCS)
  • Process automation plants (chemical, oil & gas, power)
  • PLC and controller power supply
  • Auxiliary device powering within control panels
  • Critical industrial monitoring systems
  • Manufacturing automation requiring stable AC/DC power

Product Usage Instructions

  1. Power Down: Ensure input power is switched off before installation.
  2. Mounting: Securely mount the UNC532 module within the designated DCS rack or control panel.
  3. Wiring: Connect AC mains to the input terminals according to voltage selection (115/230VAC).
  4. Power-Up: Apply AC power and verify module operation using the LED status indicators.
  5. Load Connection: Connect the regulated 24V output to downstream modules, I/O devices, or controllers.
  6. Verification: Check voltage output and load stability; monitor status LEDs for fault conditions.

Routine inspection and cleaning of input terminals ensure long-term reliable operation.

Technical Description

The INVENSYS UNC532 S-532-N is a high-quality AC-to-AC control power module that converts standard AC mains into a stable 24V output for industrial control equipment. It incorporates protection circuits to prevent damage from overloads, short circuits, or thermal stress, while galvanic isolation ensures that sensitive downstream electronics remain protected from mains transients and electrical noise.

The module is designed for seamless integration into Invensys DCS racks, providing dependable, low-noise power to controllers, I/O modules, and other auxiliary devices. Its firmware version V5G ensures compatibility with system monitoring and diagnostics for power health reporting.

Recommended Additional INVENSYS Modules

Below is a randomized list of 20 Invensys modules commonly stocked, covering controllers, I/O, and power components.

No. Model Number Module Type Typical Function
1 UNC500 Power Supply DCS control power
2 S-540-N Power Module Regulated AC output
3 I/A Series I/O Digital Input Module Field signal acquisition
4 I/A Series O/P Digital Output Module Actuator control
5 AI-400 Analog Input Module Process measurement
6 AO-400 Analog Output Module Process control output
7 PLC-500 Controller CPU Core processing unit
8 UNC520 Power Supply Module AC/DC conversion
9 S-530-N Power Module Rack-mounted control power
10 DI-600 High-Speed Digital Input Fast event acquisition
11 DO-600 Relay Output Module Discrete actuator control
12 CI-400 Communication Interface DCS networking
13 RI-100 Redundant Input Module High-reliability I/O
14 RO-100 Redundant Output Module Fault-tolerant control
15 SC-100 Sensor Conditioner Signal scaling and isolation
16 HI-200 High-Resolution Analog Input Precision measurement
17 AO-410 High-Precision Analog Output Control signal output
18 UNC540 Backup Power Module Redundant power supply
19 CI-500 Network Communication Module Protocol interface
20 FRC-100 Fieldbus Interface DeviceNet/Modbus support

Summary

The INVENSYS UNC532 S-532-N F/W V5G 115/230VAC 50/60Hz 24VA is a durable and reliable control power module for DCS and process automation systems. Its industrial design, protective features, and stable AC output make it ideal for powering controllers, I/O modules, and auxiliary devices in critical industrial applications.

 

 

Similar items