The ABB SAFW1000 is a high-precision current transformer transducer designed for the accurate measurement and monitoring of AC currents up to 1000A. This industrial-grade component converts high primary currents into a proportional, low-level secondary signal suitable for electronic control units, protective relays, and metering devices. Built to endure the electrical and thermal stresses of power distribution systems, the SAFW1000 ensures linearity and high insulation safety, making it a vital link in energy management and equipment protection.
Product Specifications
-
Model Number: SAFW1000
-
Manufacturer: ABB
-
Product Type: Current Transformer (CT) / Transducer
-
Primary Current Rating: 1000A AC
-
Secondary Output: Standardized mA or V signal (application dependent)
-
Dimensions: 145 mm x 128 mm x 64 mm
-
Weight: 1.35 kg
-
Country of Origin: Italy / Germany
-
Insulation Class: Class E or B (system specific)
-
Accuracy Class: 0.5 or 1.0 (typical)
Application Areas
The SAFW1000 is primarily deployed in medium and high-voltage power systems for current sensing. It is widely used in switchgear cabinets, motor control centers (MCCs), and substation monitoring systems. It plays a key role in energy billing, load balancing, and protective circuitry for large industrial motors, transformers, and generators. In automation environments, it provides the feedback signal necessary for power factor correction and harmonic analysis.
Operating Instructions
Before installation, verify that the primary current of the system does not exceed the 1000A rating of the transducer. The SAFW1000 should be mounted securely around the primary conductor or busbar. CRITICAL SAFETY NOTE: Never leave the secondary terminals of a current transformer open-circuited while the primary is energized, as this can generate dangerously high voltages; ensure the secondary is connected to a load or short-circuited during maintenance. Use properly sized, insulated copper wiring for secondary connections to minimize signal drop. Once installed, calibrate the receiving meter or PLC to match the transformation ratio specified on the SAFW1000 nameplate.
Frequently Asked Questions (Q&A)
What is the benefit of using a transducer-style CT like the SAFW1000? Unlike standard CTs that only provide a raw current output, a transducer-style unit often integrates signal conditioning, allowing the output to be directly read by a PLC or digital controller without needing a separate conversion module.
Can the SAFW1000 be used for DC current measurement? No, this model is specifically designed for AC (alternating current) sensing based on the principle of electromagnetic induction. For DC applications, a Hall Effect sensor or a shunt-based transducer is required.
How do I determine if the transducer is failing? Signs of failure include significant heat discoloration on the casing, audible humming, or inconsistent secondary readings that do not correlate with the actual primary load. Periodic secondary resistance tests can help verify the integrity of the internal windings.
Explore technical details and stock availability here: SAFW1000 ABB Current Transducer
Recommended Similar Models
-
ABB SAFW500 – 500A Current Transformer
-
ABB ES1000-9678 – High-Accuracy Current Sensor
-
ABB EL300P – Compact Current Transducer
-
ABB CT-AHS – Electronic Monitoring Relay
-
ABB 1SVR450116R5000 – Current Monitoring Module
