Product Description
The STN Atlas GE3006G302 is a Dual Memory Board associated with the Atlas RA 96 marine radar and electronic processing system. It is part of the GE 3006 electronic board family and is used for memory storage and data handling within the designated equipment architecture.
The related identification GE3006G312 appears on product listings and board markings alongside GE3006G302. Other visible identification codes include 1893666, 1893667, 30442 09 00, 40509 02 02, and 6E 3006 T 312 40A.
This board is intended for maintenance and repair of compatible legacy STN Atlas marine electronics. Because memory boards can have equipment-specific hardware and firmware configurations, the complete part number and original system configuration should be checked before replacement.

Main Functions and Applications
- Dual-memory board for designated STN Atlas electronic equipment.
- Supports memory-related data storage and retrieval.
- Associated with the Atlas RA 96 marine radar system.
- Used within the GE 3006 electronic board family.
- Suitable for maintenance of legacy marine radar processing equipment.
- Intended for replacement of a matching original memory board.
Product Parameters
- Brand: STN Atlas Elektronik
- Model: GE3006G302
- Product Name: Dual Memory Board RA 96
- Related Model: GE3006G312
- Board Family: GE 3006
- Product Type: Marine Electronic Memory PCB
- Equipment Association: Atlas RA 96
- Additional Markings: 1893666 / 1893667 / 30442 09 00 / 40509 02 02
- Board Marking: 6E 3006 T 312 40A
- Memory Configuration: Dual memory; exact capacity and memory technology not confirmed
- Place of Manufacture: Germany (board marking)
- Product Condition: Used, according to the referenced product listing
- Dimensions: Not confirmed
- Weight: Approximately 410 g
- Country of Origin: Germany (verify individual unit)
- Power Requirements: Supplied by the host equipment; verify original system documentation
- Discontinued Status: Current manufacturer availability not confirmed
Installation and Commissioning
- Verify the board number GE3006G302 and compare all secondary identification markings.
- Confirm whether the original installation requires GE3006G302 or GE3006G312.
- Record the existing board position and connector arrangement before removal.
- Switch off and isolate the associated radar equipment.
- Use ESD protection when handling the memory board.
- Inspect connectors, memory components, and PCB surfaces for damage or corrosion.
- Install the board in the designated equipment slot.
- Reconnect all interfaces according to the original wiring documentation.
- Restore power and check system startup and memory-related diagnostic indications.
- Perform the manufacturer’s recommended functional tests before returning the radar system to service.
Daily Maintenance and Care
- Keep the electronic cabinet clean, dry, and free from excessive dust.
- Inspect connectors for oxidation and loose contact.
- Check the PCB for corrosion, damaged components, or overheating.
- Maintain suitable cabinet temperature and ventilation.
- Monitor radar system alarms and memory-related diagnostic messages.
- Avoid unnecessary handling of memory components.
- Record board replacement and maintenance history.
Troubleshooting and Common Problems
- Memory board not detected: Check board seating, connector condition, and slot compatibility.
- Radar startup failure: Inspect the memory board and associated processing modules.
- Memory-related system alarm: Verify board identification and the installed system configuration.
- Intermittent operation: Inspect connectors and PCB contacts for poor connections.
- Data or configuration errors: Check the host equipment’s memory configuration and service documentation.
- Board visibly damaged: Remove it from service and arrange inspection by a qualified marine electronics technician.
Safety Precautions
- Isolate equipment power before removing or installing the board.
- Use an ESD-safe workstation and protective equipment.
- Do not interchange GE3006G302 and GE3006G312 solely because their markings appear related.
- Do not alter memory components or firmware without approved service documentation.
- Verify compatibility with the installed RA 96 equipment configuration.
- Installation and commissioning should be performed by qualified marine electronics personnel.
Recommended STN Atlas Models
The following are related STN Atlas marine electronic boards and equipment references. They are not confirmed direct replacements for GE3006G302.
- STN Atlas GE3006G300 – RA 96 Processor Board
- STN Atlas GE3006G301 – Address Translator Board
- STN Atlas GE3006G311 – DMC Board
- STN Atlas GE3006G312 – Dual Memory Board
- STN Atlas GE3006G322 – Dual Memory Board RA 97
- STN Atlas GE3006G313 – Video Processing Board
- STN Atlas GE3016G211 – DMC Board
- STN Atlas GE3016G241 – Rudder Control Board
- STN Atlas GE6010G202 – Receiver Board
- STN Atlas GE6010G203 – Speed Log PCB
- STN Atlas GE6010G204 – Speed Log PCB
- STN Atlas GE3044G205 – Marine Processing Interface Board
- STN Atlas NG3028G206 – Marine Electronic Module
- STN Atlas AZ3029T202 – Marine Electronic Board
- STN Atlas DS05-IMB GE3044G205 – Processing Unit Card
Always verify the complete board number, secondary markings, equipment generation, and firmware configuration before ordering or installing a replacement.

