🌐 Product Overview – Triconex AI6700 Module
The Triconex AI6700 Module is a high-performance analog input module designed for safety-critical control systems. Engineered by Triconex, this module is part of the Triconex Tricon® Series, providing precise, reliable analog signal acquisition for process automation, chemical plants, oil & gas facilities, and other industrial environments. The AI6700 ensures accurate data measurement and transmission to the Triconex safety controllers, maintaining system integrity and operational safety even under extreme conditions.
⚙️ Technical Specifications (Datasheet Overview)
| Parameter | Description |
|---|---|
| Manufacturer | Triconex |
| Model | AI6700 |
| Module Type | Analog Input (AI) Module |
| Channel Count | 8 independent analog input channels |
| Input Range | ±20 mA / ±10 V configurable per channel |
| Accuracy | ±0.1% of full scale |
| Resolution | 16-bit A/D conversion |
| Update Rate | 50 ms per channel |
| Signal Interface | 2-wire or 4-wire connection support |
| LED Indicators | Channel status, module health |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Humidity Tolerance | 5–95% non-condensing |
| Power Supply | 24 VDC nominal, 3.5 W typical |
| Mounting Type | DIN rail or Triconex rack mount |
| Dimensions (L × W × H) | 160 × 100 × 30 mm |
| Weight | Approx. 0.55 kg |
| Protection Features | Short-circuit protection, isolation between channels |
| Compliance | IEC 61508, SIL 3 certified, CE marked |
🔌 Product Description
The AI6700 Module acquires and converts analog signals from field devices such as transmitters, sensors, and process instruments, providing critical input to Triconex Tricon safety controllers. Each channel can be individually configured for current or voltage input, supporting flexible system design.
With high-resolution 16-bit A/D conversion and a fast 50 ms update rate, the module delivers precise, real-time measurements essential for safety and process control. Channel-to-channel isolation minimizes cross-talk and ensures signal integrity in noisy industrial environments. The module’s diagnostic LEDs provide instant visual feedback, indicating channel activity and overall module health, which aids in troubleshooting and preventive maintenance.
The rugged industrial design ensures stability under temperature fluctuations, vibration, and other environmental stresses. Modular construction allows quick replacement without affecting system operation, reducing downtime in critical processes.
🛠️ Installation & Maintenance
Installation Steps:
- Power Down: Ensure all power sources are disconnected before module installation.
- Mounting: Secure the module on the DIN rail or Triconex rack, ensuring proper alignment.
- Wiring: Connect analog field devices to the terminal blocks, following polarity and channel labeling.
- Power Up: Apply 24 VDC and check LED indicators for correct module initialization.
- Configuration: Configure channel parameters through the Triconex controller software.
Maintenance Tips:
- Conduct regular visual inspections for loose connections or corrosion.
- Keep the module free from dust, moisture, and conductive contaminants.
- Verify calibration periodically to maintain measurement accuracy.
- Avoid touching internal components without ESD protection.
- Replace modules with compatible Triconex parts to maintain system integrity.
⚠️ Usage Notes
- Operate within the specified voltage, temperature, and humidity ranges.
- Do not attempt unauthorized repairs; only certified technicians should service the module.
- Maintain proper grounding to reduce electrical noise and potential damage.
- Store unused modules in anti-static packaging.
- Verify compatibility with the existing Triconex system before installation.
🧩 Key Features
✅ 8 high-accuracy analog input channels
✅ ±20 mA / ±10 V configurable input range
✅ Fast 50 ms per channel update rate
✅ 16-bit high-resolution A/D conversion
✅ SIL 3 certified for safety-critical applications
✅ Modular and hot-swappable design
🔗 Related Product Recommendations
| Model | Description | Hyperlink |
|---|---|---|
| Triconex AI6600 | 4-channel Analog Input Module | View Product |
| Triconex AI6710 | 16-channel Analog Input Module | View Product |
| Triconex AI6730 | High-density 32-channel Analog Input | View Product |
| Triconex AI6750 | Analog Input with Extended Range | View Product |
| Triconex AI6780 | Redundant Analog Input Module | View Product |
📦 Conclusion
The Triconex AI6700 Module is a robust, precise, and reliable analog input solution for safety-critical applications. Its high-resolution A/D conversion, flexible input configuration, and SIL 3 certification make it ideal for process automation in hazardous or industrial environments. The module’s modularity and diagnostic capabilities simplify installation, monitoring, and maintenance, ensuring continuous and safe system operation.
For more information and product availability, please visit:
👉 https://www.fy-module.com/
👉 https://www.fy-module.com/product/
