The UniOP BKDC16-0045 (Part of the H/WV033A series) is a robust, industrial-grade Human-Machine Interface (HMI) panel. Widely used in automated machinery and production lines, this unit provides a graphical interface for machine operators to monitor process data, adjust setpoints, and view system alarms. The unit is recognized for its reliability in demanding environments and its compatibility with a vast range of industrial PLC communication protocols.
⚙️ Technical Parameters and Specifications
-
Model Number: BKDC16-0045 (H/WV033A)
-
Firmware Version: FW37 4.41
-
Display Type: High-contrast monochrome or grayscale LCD (depending on specific revision)
-
Input Method: Tactile membrane keypad
-
Operating Voltage: 24V DC
-
Communication Ports: RS-232/RS-485/Current Loop (supports multi-protocol PLC connectivity)
-
Dimensions: Standard panel-mount cutout dimensions
-
Weight: Approximately 0.9 kg
-
Country of Origin: Italy (Exor International / UniOP)
🏭 Application Areas
-
Packaging Machinery: Centralized interface for setting machine speeds, cycle counts, and operating modes.
-
Conveyor Systems: Monitoring flow rates and status of diverters/sensors.
-
Factory Automation: Used as an operator terminal for small-to-medium-sized PLC-based control systems.
-
Retrofit Projects: Frequently used in older production lines to replace failing CRT or legacy text-based displays.
📖 Product User Guide
To install the UniOP BKDC16-0045, cut the mounting aperture to the manufacturer’s specified dimensions in the machine cabinet door. Secure the panel using the included mounting clips to ensure an IP-rated seal. Connect the 24V DC power supply to the labeled terminal block, ensuring correct polarity. Interface the unit with your PLC using the appropriate communication cable—the pinout for the RS-485 port varies by the target PLC (e.g., Siemens, Mitsubishi, Allen-Bradley), so ensure the cable matches your specific protocol. After initial power-up, use the UniOP Designer software to upload or verify the project file, ensuring the configuration matches your machine’s I/O mapping.
❓ Frequently Asked Questions (Q&A)
How do I update or modify the project file on this unit? You will need the original project file (.isp) and the UniOP Designer configuration software. Connect your PC to the HMI’s serial port using the appropriate programming cable and use the software’s “Download” function to update the firmware or project data.
What should I do if the screen is blank but the unit has power? First, adjust the contrast settings if possible via the keypad. If the screen remains blank, check the ribbon cable connecting the LCD module to the main logic board. In some cases, the internal CCFL backlight (or LED driver) may have failed, requiring a screen assembly replacement.
Is the firmware version FW37 4.41 critical for compatibility? Yes. Certain project files are compiled for specific firmware versions. If you are replacing a faulty unit, try to match the firmware version (4.41) as closely as possible to avoid communication errors or missing graphical objects.
📋 Recommended Similar Models
-
UniOP eTOP Series (Modern successor with touchscreen capabilities)
-
Exor International UniOP HMI Series
-
Siemens SIMATIC Basic Panel (KTP Series)
-
Pro-face GP4000 Series (Alternative operator interface)
-
Beijer Electronics iX Series (Industrial HMI solution)
