The W30824-Q32-X-002 is a specialized interface board commonly utilized in Siemens-based industrial control systems and telecommunications infrastructure. This board facilitates high-speed data exchange and signal conditioning between central processing units and peripheral communication modules. It is engineered to maintain signal integrity in high-density rack environments, providing reliable connectivity for complex automation and switching tasks.
Product Specifications and Datasheet
-
Model Number: W30824-Q32-X-002
-
Component Type: Interface / Communication Control Board
-
System Compatibility: Compatible with specific Siemens HiPath and industrial automation series
-
Connectivity: Multi-pin connector array for backplane integration
-
Signal Support: Supports both digital signaling and specialized serial communication links
-
Circuit Protection: Integrated surge protection and noise filtering components
-
Dimensions: Standard European card format (Approx. 160 mm x 100 mm)
-
Weight: 0.28 kg
-
Country of Origin: Germany
Application Areas
-
Telecommunications: Used as a trunk or subscriber interface within large-scale private branch exchange (PBX) systems.
-
Industrial Switching: Managing signal routing between different hardware tiers in automated production lines.
-
Data Processing: Acting as a gateway for protocol conversion within specialized server racks.
-
Infrastructure Control: Monitoring and routing data in traffic management or railway signaling cabinets.
Product Instructions for Use
-
Safety Precaution: This board is highly sensitive to Electrostatic Discharge (ESD). Ensure you are wearing a grounded wrist strap before removing the board from its anti-static bag.
-
Installation: Align the board with the guide rails in the card cage. Gently but firmly push the board until the rear connectors seat into the backplane. Secure the front levers or screws if applicable.
-
Connection: Attach any external cables to the front-facing ports. Ensure the connectors are locked to prevent intermittent signal loss due to vibration.
-
Initialization: Upon powering the system, verify that the diagnostic LEDs on the board’s faceplate (if equipped) transition from red/orange to a steady green status, indicating successful synchronization with the host.
Q&A: Frequently Asked Questions
Q1: What is the significance of the “-X-” in the part number? A1: In the Siemens naming convention, the “X” often denotes a specific variant or an “Exchange” version of the hardware, typically indicating it is a standardized, replaceable module within a larger series.
Q2: Can this board be used in a standard PC? A2: No, the W30824-Q32-X-002 is a proprietary industrial interface board designed for specific rack-based backplanes and is not compatible with standard PCIe or consumer hardware slots.
Q3: Does the board require manual jumper settings? A3: Most modern revisions of this board are “Plug and Play” within their designated systems, with addressing and configuration handled automatically by the system software.
Recommended Similar Models
-
W30824-Q32-X-001: An earlier revision often used in legacy communication systems.
-
W30824-Q105-X: A higher-density interface variant designed for more complex signal routing.
-
S30810-Q2158-X: A common processor or interface board often found in the same system racks.
-
S30810-Q2310-X: A subscriber line interface board used for direct terminal connectivity.
-
W30824-Q93-X: A specialized interface module used for fiber-optic or high-speed data links.
