WOODWARD | 9907-014 | 2301A Speed Control

The WOODWARD 9907-014 is a low-voltage electronic speed control unit from the trusted 2301A series, designed for precise engine and turbine speed regulation. This model provides reliable closed-loop control for diesel, gas, or steam prime movers, ensuring consistent performance and stability in industrial power generation and marine propulsion systems.

WOODWARD 2301A SPEED CONTROL 9907-014 REV.J Image 1 of 4

📊 Technical Parameters Datasheet

  • Brand: WOODWARD

  • Model: 9907-014

  • Series: 2301A Speed Control Series

  • Product Name: Electronic Speed Controller

  • Origin: USA / Global Manufacturing

  • Status: Industrial Automation Spare Part

  • Dimensions: Standard Chassis Form Factor (Approx. 8.625″ W x 7.25″ H x 2.5″ D)

  • Weight: Approx. 1.13 kg to 1.5 kg

  • Power Supply: 20–40 VDC Nominal (Low Voltage DC)

  • Actuator Output: 0–200 mA

  • Speed Sensing Input: Magnetic Pickup (MPU), 1.0 to 30 Vrms

🛠️ Operation Protocols & Usage Methods

Operation requires mounting the unit securely in a vibration-protected control cabinet and utilizing shielded, twisted-pair cabling for all sensor and actuator connections to prevent electromagnetic interference. Calibration, gain adjustments, and speed frequency range selection via internal DIP switches should be performed by qualified technicians.

⚡ Start-up and Shut-down Sequences

Start-up Sequence:

  1. Verify all wiring, magnetic pickup (MPU) air gaps, actuator linkages, and power connections are secure.

  2. Confirm that the incoming DC power supply voltage is stable and within the 20–40 VDC range.

  3. Energize the control circuit power to initialize the 2301A control module.

  4. Start the prime mover and let it idle, observing speed stability and response before synchronizing or loading the generator.

Shut-down Sequence:

  1. Gradually transfer electrical load away from the prime mover until it reaches an unloaded state.

  2. Open the main generator breaker to safely isolate output power.

  3. Shut down the engine or turbine following standard operating procedures.

  4. Disconnect control power if long-term maintenance or board replacement is required.

📝 Product Usage Instructions

Use the onboard potentiometers (Gain, Stability, Actuator Compensation) to fine-tune the dynamic response of the prime mover. Routinely inspect signal shielding, terminal blocks, and grounding integrity to maintain accurate speed control and prevent hunting or speed instability.

❓ Common Questions & Answers Q&A

Q: What is the primary function of the Woodward 9907-014?

A: It is designed to precisely govern the speed of diesel, gas, or steam prime movers by processing magnetic pickup signals and modulating output to the actuator.

Q: What happens if the MPU (magnetic pickup) signal is lost during operation?

A: The control is engineered with fail-safe behavior to immediately scale back the actuator output to minimum fuel, preventing potential overspeed conditions.

🚀 Recommended Series Models

  • 9907-018

  • 9907-019

  • 9907-020

  • 9907-016

  • 9905-144

  • 8270-100

  • 5416-015

  • 9907-162

  • 9907-163

  • 9907-164

Share this story: